Products
Compact Cyinder
TACE Series Compact Air Cylinder TACE40X5 TACE40X10 TACE40X15 TACE40X20 TACE40X25 TACE40X30 TACE40X35 TACE40X45 TACE40X50
  • TACE20X30
  • TACE20X30-1
  • TACE20X30-2
TACE Series Compact Air Cylinder TACE40X5 TACE40X10 TACE40X15 TACE40X20 TACE40X25 TACE40X30 TACE40X35 TACE40X45 TACE40X50

Product Name: ACE Series Compact Cyclinder
Product Model: TACE40X5 TACE40X10 TACE40X15 TACE40X20 TACE40X25 TACE40X30 TACE40X35 TACE40X45 TACE40X50
Valve Type: MI Cyclinder, Cyclinder
Brand: AirTAC
Fluid: Air
Acting Type: Double Acting, Single Acting



Download:
Specification:

Specification:

Bore size: 12 16 20 25 32 40 50 63 80 100 125
Acting type: Double Acting
Single Acting Push、Single Acting Pull -
Fluid:
Air(to be filtered by 40μm filter element)
Operating Pressure: Double Acting: 0.1~1.0MPa(15~145psi)
Single Acting: 0.2~1.0MPa(28~145psi)
Proof pressure: 1.5MPa(215psi)
Temperature(℃): -20~80
Speed rang (mm/s): Double Acting: 30~500      Single Acting:50~500
Stroke tolerance: Stroke≤0~150(0~+1.0)   Stroke>150(0~+1.4)
Cushion Type: Bumper
Port Size: M5X0.8 G1/8 G1/4

① PT thread, NPT thread and G thread are available.
Stroke:

Bore size(mm) Standard Stroke(mm) Max Stroke(mm)
Normal type: Double Acting:  12 5 10 15 20 25 30 35 40 45 50  50
16 5 10 15 20 25 30 35 40 45 50 55 60 70 75 75
20 5 10 15 20 25 30 35 40 45 50 55 60 70 75 80 90 100 100
25 5 10 15 20 25 30 35 40 45 50 55 60 70 75 80 90 100 110 120 125 150 150
32 40 5 10 15 20 25 30 35 40 45 50 55 60 70 75 80 90 100 110 120 125 150 160 175 200 200
50 63 5 10 15 20 25 30 35 40 45 50 55 60 70 75 80 90 100 110 120 125 150 160 175 200 225 250 250
80 100 125 5 10 15 20 25 30 35 40 45 50 55 60 70 75 80 90 100 110 120 125 150 160 175 200 225 250 275 300 300
Single Acting: 12 5 10 10
16~100 5 10 15 20 25 25
 Guide type: Double Acting:  12 5 10 15 20 25 30 35 40 45 50 50
16 5 10 15 20 25 30 35 40 45 50 55 60 70 75 75
20 25 5 10 15 20 25 30 35 40 45 50 55 60 70 75 80 90 100 100
32 40 5 10 15 20 25 30 35 40 45 50 55 60 70 75 80 90 100 100
50 63 5 10 15 20 25 30 35 40 45 50 55 60 70 75 80 90 100 100
80 100 5 10 15 20 25 30 35 40 45 50 55 60 70 75 80 90 100 100

① within the allowable travel range, when the trip> maximum travel, non-standard processing, other special itinerary please contact with the company;

② the maximum range of non-standard travel range of more than a standard stroke restructuring, its dimensions for the previous standard stroke cylinder dimensions. Such as the stroke of 23 non-standard stroke cylinder is a standard stroke of 25 standard cylinder restructuring, its dimensions and the same.


Product Feature:

1.In accordance with ISO21287 standard, the mounting size is vogue.

2.The cylinder body connects with the threads of the front and back cover, forming high strength and convenient maintenance.

3.The internal diameter of the body is treated with rolling followed by the treatment of hard anodizing, forming an excellent abrasion resistance and durability.

4.The seal of piston adopts heterogeneous two-way seal structure. It has compact dimension and the function of oil reservation.

5.Compact structure can effectively save fifty percent installation space with ISO15552 standard cylinder.

6.There are magnetic switch slots around the cylinder body, which is convenient to install inducting switch.

7.Bumper is available and it can availably absorb excrescent energy.

8.Installing accessories with various specifications are optional.


Installation & Usage:

1. When load changes in the work, the cylinder with abundant output capacity shall be ed.

2.Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion.

3.Necessary protection measure shall be taken in the environment with higher humidity, much dust or water drops, oil dust and welding dregs.

4.Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.

5.The medium used by cylinder shall be filtered to 40μm or below.

6.Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.

7.The cylinder shall be carried out test run without load before application. Prior to run, buffer shall be turned to the minimum and gradually released to avoid the damage on cylinder caused by excessive impact.

8.The cylinder shall avoid the influence of side load in operation to maintain the normal work of cylinder and extend the service life.

9. If the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment to the  surface. Anti-dust caps shall be added in air inlet and outlet ports.

Order Code:

ACE Series.jpg

More product models can refer to the following:
TACE12X5 TACE12X10 TACE12X15 TACE12X20 TACE12X25 TACE12X30 TACE12X35 TACE12X40 TACE12X45 TACE12X50
TACE16X5 TACE16X10 TACE16X15 TACE16X20 TACE16X25 TACE16X30 TACE16X35 TACE16X40 TACE16X45 TACE16X50
TACE16X55 TACE16X60 TACE16X70 TACE16X75 TACE20X5 TACE20X10 TACE20X15 TACE20X20 TACE20X25 TACE20X30
TACE20X35 TACE20X40 TACE20X45 TACE20X50 TACE20X55 TACE20X60 TACE20X70 TACE20X75 TACE20X80 TACE20X90
TACE20X100 TACE25X5 TACE25X10 TACE25X15 TACE25X20 TACE25X25 TACE25X30 TACE25X35 TACE25X40 TACE25X45
TACE25X50 TACE25X55 TACE25X60 TACE25X70 TACE25X75 TACE25X80 TACE25X90 TACE25X100 TACE32X5 TACE32X10
TACE32X15 TACE32X20 TACE32X25 TACE32X30 TACE32X35 TACE32X40 TACE32X45 TACE32X50 TACE32X55 TACE32X60
TACE32X70 TACE32X75 TACE32X80 TACE32X90 TACE32X100 TACE40X5 TACE40X10 TACE40X15 TACE40X20 TACE40X25
TACE40X30 TACE40X35 TACE40X40 TACE40X45 TACE40X50 TACE40X55 TACE40X60 TACE40X70 TACE40X75 TACE40X80
TACE40X90 TACE40X100 TACE50X5 TACE50X10 TACE50X15 TACE50X20 TACE50X25 TACE50X30 TACE50X35 TACE50X40
TACE50X45 TACE50X50 TACE50X55 TACE50X60 TACE50X70 TACE50X75 TACE50X80 TACE50X90 TACE50X100 TACE63X5
TACE63X10 TACE63X15 TACE63X20 TACE63X25 TACE63X30 TACE63X35 TACE63X40 TACE63X45 TACE63X50 TACE63X55
TACE63X60 TACE63X70 TACE63X75 TACE63X80 TACE63X90 TACE63X100 TACE80X5 TACE80X10 TACE80X15 TACE80X20
TACE80X25 TACE80X30 TACE80X35 TACE80X40 TACE80X45 TACE80X50 TACE80X55 TACE80X60 TACE80X70 TACE80X75
TACE80X80 TACE80X90 TACE80X100 TACE100X5 TACE100X10 TACE100X15 TACE100X20 TACE100X25 TACE100X30 TACE100X35
TACE100X40 TACE100X45 TACE100X50 TACE100X55 TACE100X60 TACE100X70 TACE100X75 TACE100X80 TACE100X90 TACE100X100
Symbol:
ACE Series.jpg
TACE12X5 TACE32X10 TACE80X15 TACE20X10S TACE50X10S
TACE12X10 TACE32X15 TACE80X20 TACE20X15S TACE50X15S
TACE12X15 TACE32X20 TACE80X25 TACE20X20S TACE50X20S
TACE12X20 TACE32X25 TACE80X30 TACE20X25S TACE50X25S
TACE12X25 TACE32X30 TACE80X40 TACE20X30S TACE50X30S
TACE16X10 TACE40X10 TACE100X20 TACE25X10S TACE63X10S
TACE16X15 TACE40X15 TACE100X25 TACE25X15S TACE63X15S
TACE16X20 TACE40X20 TACE100X30 TACE25X20S TACE63X20S
TACE16X25 TACE40X25 TACE100X40 TACE25X25S TACE63X25S
TACE16X30 TACE40X30 TACE100X50 TACE25X30S TACE63X30S
TACE20X10 TACE50X10 TACE12X5S TACE32X10S TACE80X15S
TACE20X15 TACE50X15 TACE12X10S TACE32X15S TACE80X20S
TACE20X20 TACE50X20 TACE12X15S TACE32X20S TACE80X25S
TACE20X25 TACE50X25 TACE12X20S TACE32X25S TACE80X30S
TACE20X30 TACE50X30 TACE12X25S TACE32X30S TACE80X40S
TACE25X10 TACE63X10 TACE16X10S TACE40X10S TACE100X20S
TACE25X15 TACE63X15 TACE16X15S TACE40X15S TACE100X25S
TACE25X20 TACE63X20 TACE16X20S TACE40X20S TACE100X30S
TACE25X25 TACE63X25 TACE16X25S TACE40X25S TACE100X40S
TACE25X30 TACE63X30 TACE16X30S TACE40X30S TACE100X50S
Contact us
E-mail:info@fitsitech.com
Tel:+86-19928764188 
Add:Shangmei Times, 57 Longguan East Road, Tsinghua Community, Longhua Street, Longhua District, Shenzhen, China

     
Inquiry
Name:
E-mail:
Description:
CopyRight © 2010~2017 Shenzhen Fitsi Technology Co.,LTD All Right Reserved.     Sitemap    粤ICP备14001694号-由万创科技提供技术支持