Specification：

① PT thread, NPT thread and G thread are available.
Stroke：

① other special itinerary please contact with the company;

② The max range of non-standard travel range of more than a standard stroke restructuring, its dimensions for the previous standard stroke cylinder dimensions. Such as the stroke of 23 non-standard stroke cylinder is a standard stroke of 25 standard cylinder restructuring, its dimensions and the same.

1.JIS standard is implemented.

2.Cylinder can be mounted from 4 directions, and convenient to install and use.

3.Multitudinous cylinder can be mounted side by side to save space.

4.The front end of the cylinder is designed with boss. Centering can be done easily.

5.The internal diameter of the body is treated with rolling followed by the treatment of hard anodizing, forming an excellent abrasion resistance and durability.

6.With magnet type is of the feature of position sensing.

7.There are magnetic switch slots around the cylinder body, which is convenient to install inducting switch.

8.The seal of piston adopts heterogeneous two-way seal structure. It has compact dimension and the function of grease reservation.

Installation & Usage:
1. When load changes in the work, the cylinder with abundant output capacity shall be ed.

2.Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion.

3.Necessary protection measure shall be taken in the environment with higher humidity, much dust or water drops, oil dust and welding dregs.

4.Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.

5.The medium used by cylinder shall be filtered to 40μm or below.

6.Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.

7.The cylinder shall be carried out test run without load before application. Prior to run, buffer shall be turned to the minimum and gradually released to avoid the damage on cylinder caused by excessive impact.

8.The cylinder shall avoid the influence of side load in operation to maintain the normal work of cylinder and extend the service life.

9. If the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment to the  surface. Anti-dust caps shall be added in air inlet and outlet ports.