Product Name: MPE Series Thraeded Cylinder Product Model: MPE6X5N MPE6X10N MPE6X15N MPE8X5N MPE8X10N MPE8X15N MPE10X5N MPE10X10N MPE10X15N Brand: AirTAC Fluid: Air Acting: Single Acting Cushion Type: No Cushion
Specification：
| Bore size: | 6 | 8 | 10 | 12 | 16 |
| Acting type: | Single Acting | ||||
|
Fluid: |
Air(to be filtered by 40μm filter element) | ||||
| Operating Pressure: |
0.2~0.7MPa（28~100psi） |
0.15~0.7MPa（22~100psi） | |||
| Proof pressure: | 1.2MPa（150psi） | ||||
|
Mounting Type: |
Embedded Type, End inlet Type | ||||
| Temperature（℃）: | -20~70 | ||||
| Speed rang (mm/s): | 50~500 | ||||
| Stroke tolerance： | (0~+1.0) | ||||
| Cushion Type: | No Cushion | ||||
| Port Size： | M5X0.8 | ||||
Stroke：
| Bore size(mm) | Standard Stroke(mm) | Max Stroke(mm) |
|
6 |
5 10 15 | 15 |
| 8 | 5 10 15 |
15 |
| 10 | 5 10 15 | 15 |
| 12 | 5 10 15 | 15 |
| 16 | 5 10 15 | 15 |
① other special itinerary please contact with the company;
1.It is compact, small size and light weight. It is easy to install and dismantle.
2. Multi cylinders can be integrated to save room.
3.Mounting accessories with various specifications are optional.
4.Cylinders of various specifications are optional.
Installation & Usage:
1. When load changes in the work, the cylinder with abundant output capacity shall be ed.
2. Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion.
3. Necessary protection measure shall be taken in the environment with higher humidity, much dust or water drops, oil dust and welding dregs.
4. Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.
5. The medium used by cylinder shall be filtered to 40μm or below.
6. As both of the front cover and piston of the cylinder are short, typically too large stroke can not be ed.
7. Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.
8. The cylinder shall avoid the influence of side load in operation to maintain the normal work of cylinder and extend the service life.
9. If the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment to the surface. Anti-dust caps shall be added in air inlet and outlet ports. The front and back cover can not be dismantled, which shall be especially noticed.
| MPE6X5 N | MPE8X5 N | MPE10X5 N | MPE12X5 N | MPE16X5 N |
| MPE6X10 N | MPE8X10 N | MPE10X10 N | MPE12X10 N | MPE16X10 N |
| MPE6X15 N | MPE8X15 N | MPE10X15 N | MPE12X15 N | MPE16X15 N |
