Products
Mimi Cylinder
AirTAC MI Series MI32X350 MI32X400 MI32X450 MI32X500 Mini-cylinder Air Cylinder Pneumatic Air Tools
  • double acting cylinder
  • double acting pneumatic cylinder
  • festo pneumatic cylinder
  • smc pneumatic cylinder
AirTAC MI Series MI32X350 MI32X400 MI32X450 MI32X500 Mini-cylinder Air Cylinder Pneumatic Air Tools

Product Name: MI Series MI Cyclinder
Product Model: MI32X350 MI32X400 MI32X450 MI32X500
Valve Type: MI Cyclinder, Cyclinder
Brand: AirTAC
Fluid: Air
Acting Type: Double Acting, Single Acting Pull, Single Acting Push



Download:
Specification:

Specification:

Bore size: 8 10 12 16 20 25 32 40
Acting type: Double Acting, Single Acting Pull, Single Acting Push
- Double Acting with Cushion
Fluid:
Air(to be filtered by 40μm filter element)
Operating Pressure: Double Acting: 0.1~1.0MPa(15~145psi)(1.0~10.0bar)
Single Acting: 0.2~1.0MPa(28~145psi)(2.0~10.0bar)
Proof pressure: 1.5MPa(215psi)(15bar)
Temperature(℃): -20~70
Speed rang (mm/s): Double Acting: 30~800  Single Acting: 50~800
Stroke tolerance: 0~150(0~+1.0) >150(0~+1.4)
Cushion Type: MIC Series: Variable Cushion  Other Series: Bumper
Port Size: M5x0.8 PT1/8
PT1/4


 Stroke:

Bore size(mm) Standard Stroke(mm) Max Stroke(mm) Allow Stroke(mm)
MI
-
8 10 15 20 25 30 40 50 60 75 80 100 125 150
150 200
10 10 15 20 25 30 40 50 60 75 80 100 125 150 160 175 200 200 200
12 10 15 20 25 30 40 50 60 75 80 100 125 150 160 175 200 250 250 500
MIC
16 10 15 20 25 30 40 50 60 75 80 100 125 150 160 175 200 250 300 350 400 450 500 500 600
20 500 800
25 500 800
32 500 800
40 500 800
MID
MIJ
- 8 10 15 20 25 30 40 50 60 75 80 100 100 -
10 10 15 20 25 30 40 50 60 75 80 100 100 -
12 10 15 20 25 30 40 50 60 75 80 100 125 150 160 175 200 200 -
MICD
MICJ
16 10 15 20 25 30 40 50 60 75 80 100 125 150 160 175 200 250 300 300 -
20 10 15 20 25 30 40 50 60 75 80 100 125 150 160 175 200 250 300 300 -
25 10 15 20 25 30 40 50 60 75 80 100 125 150 160 175 200 250 300 300 -
32 10 15 20 25 30 40 50 60 75 80 100 125 150 160 175 200 250 300 350 400 450 500 500 -
40 500 -
Bore size(mm) Standard Stroke(mm)
MSI
MTI
8 10 15 20 25 30 40 50
10 10 15 20 25 30 40 50
12 10 15 20 25 30 40 50
16 10 15 20 25 30 40 50 60 75 80 100
20 10 15 20 25 30 40 50 60 75 80 100 125 150
25 10 15 20 25 30 40 50 60 75 80 100 125 150
32 10 15 20 25 30 40 50 60 75 80 100 125 150
40 10 15 20 25 30 40 50 60 75 80 100 125 150

Product Feature:

1.In accordance with ISO6432 standard(Φ8~Φ25).

2.Front and back cover owns fixed bumper pad which can reduce the impact of direction-change of the cylinder.

3.There are several mode of back cover, which makes the installation of cylinder more convenient.

4.Front and back cover and stainless steel block adopt riveted rolling packed structure to form a reliable connection.

5.Piston rod and cylinder body with the material of stainless steel make the cylinder adapt general working environment with corrosivity.

6.There are cylinders and accessories with several specifications for installation for your choice.

Installation & Usage:
1. When load changes in the work, the cylinder with abundant output capacity shall be ed.

2.Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion.

3.Necessary protection measure shall be taken in the environment with higher humidity, much dust or water drops, oil dust and welding dregs.

4.Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.

5.The medium used by cylinder shall be filtered to 40μm or below.

6.Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.

7.The cylinder shall be carried out test run without load before application. Prior to run, buffer shall be turned to the minimum and gradually released to avoid the damage on cylinder caused by excessive impact.

8.The cylinder shall avoid the influence of side load in operation to maintain the normal work of cylinder and extend the service life.

9. If the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment to the  surface. Anti-dust caps shall be added in air inlet and outlet ports.


Order Code:
6365242641521633602007796.jpg
Symbol:
MI Series.gif
MI32X10CA MI32X60U MI32X175R MI32X500CM MI32X80SU MI32X80SCM
MI32X15CA MI32X75U MI32X200R MI32X10SCA MI32X125SU MI32X125SCM
MI32X20CA MI32X80U MI32X250R MI32X15SCA MI32X160SU MI32X160SCM
MI32X25CA MI32X100U MI32X300R MI32X20SCA MI32X175SU MI32X175SCM
MI32X30CA MI32X125U MI32X350R MI32X25SCA MI32X350SU MI32X350SCM
MI32X40CA MI32X150U MI32X400R MI32X30SCA MI32X400SU MI32X400SCM
MI32X50CA MI32X160U MI32X450R MI32X40SCA MI32X450SU MI32X450SCM
MI32X60CA MI32X175U MI32X500R MI32X50SCA MI32X500SU MI32X500SCM
MI32X75CA MI32X200U MI32X10CM MI32X60SCA MI32X10SR MI32X25SCM
MI32X80CA MI32X250U MI32X15CM MI32X75SCA MI32X15SR MI32X25SR
MI32X100CA MI32X300U MI32X20CM MI32X80SCA MI32X20SR MI32X25SU
MI32X125CA MI32X350U MI32X25CM MI32X100SCA MI32X30SR MI32X50SCM
MI32X150CA MI32X400U MI32X30CM MI32X125SCA MI32X40SR MI32X50SR
MI32X160CA MI32X450U MI32X40CM MI32X150SCA MI32X60SR MI32X50SU
MI32X175CA MI32X500U MI32X50CM MI32X160SCA MI32X75SR MI32X75SCM
MI32X200CA MI32X10R MI32X60CM MI32X175SCA MI32X80SR MI32X75SU
MI32X250CA MI32X15R MI32X75CM MI32X200SCA MI32X125SR MI32X100SCM
MI32X300CA MI32X20R MI32X80CM MI32X250SCA MI32X160SR MI32X100SR
MI32X350CA MI32X25R MI32X100CM MI32X300SCA MI32X175SR MI32X100SU
MI32X400CA MI32X30R MI32X125CM MI32X350SCA MI32X350SR MI32X150SCM
MI32X450CA MI32X40R MI32X150CM MI32X400SCA MI32X400SR MI32X150SU
MI32X500CA MI32X50R MI32X160CM MI32X450SCA MI32X450SR MI32X200SCM
MI32X10U MI32X60R MI32X175CM MI32X500SCA MI32X500SR MI32X200SR
MI32X15U MI32X75R MI32X200CM MI32X10SU MI32X10SCM MI32X200SU
MI32X20U MI32X80R MI32X250CM MI32X15SU MI32X15SCM MI32X250SCM
MI32X25U MI32X100R MI32X300CM MI32X20SU MI32X20SCM MI32X250SR
MI32X30U MI32X125R MI32X350CM MI32X30SU MI32X30SCM MI32X250SU
MI32X40U MI32X150R MI32X400CM MI32X40SU MI32X40SCM MI32X300SCM
MI32X50U MI32X160R MI32X450CM MI32X60SU MI32X60SCM MI32X300SU
Contact us
E-mail:info@fitsitech.com
Tel:+86-19928764188 
Add:Shangmei Times, 57 Longguan East Road, Tsinghua Community, Longhua Street, Longhua District, Shenzhen, China

     
Inquiry
Name:
E-mail:
Description:
CopyRight © 2010~2017 Shenzhen Fitsi Technology Co.,LTD All Right Reserved.     Sitemap    粤ICP备14001694号-由万创科技提供技术支持