Products
Mimi Cylinder
AirTAC MI Series MI25X100 MI25X125 MI25X150 MI25X175 Mini-cylinder Air Cylinder Pneumatic Air Tools
  • double acting cylinder
  • double acting pneumatic cylinder
  • festo pneumatic cylinder
  • smc pneumatic cylinder
AirTAC MI Series MI25X100 MI25X125 MI25X150 MI25X175 Mini-cylinder Air Cylinder Pneumatic Air Tools

Product Name: MI Series MI Cyclinder
Product Model: MI25X100 MI25X125 MI25X150 MI25X175
Valve Type: MI Cyclinder, Cyclinder
Brand: AirTAC
Fluid: Air
Acting Type: Double Acting, Single Acting Pull, Single Acting Push



Download:
Specification:

Specification:

Bore size: 8 10 12 16 20 25 32 40
Acting type: Double Acting, Single Acting Pull, Single Acting Push
- Double Acting with Cushion
Fluid:
Air(to be filtered by 40μm filter element)
Operating Pressure: Double Acting: 0.1~1.0MPa(15~145psi)(1.0~10.0bar)
Single Acting: 0.2~1.0MPa(28~145psi)(2.0~10.0bar)
Proof pressure: 1.5MPa(215psi)(15bar)
Temperature(℃): -20~70
Speed rang (mm/s): Double Acting: 30~800  Single Acting: 50~800
Stroke tolerance: 0~150(0~+1.0) >150(0~+1.4)
Cushion Type: MIC Series: Variable Cushion  Other Series: Bumper
Port Size: M5x0.8 PT1/8
PT1/4


 Stroke:

Bore size(mm) Standard Stroke(mm) Max Stroke(mm) Allow Stroke(mm)
MI
-
8 10 15 20 25 30 40 50 60 75 80 100 125 150
150 200
10 10 15 20 25 30 40 50 60 75 80 100 125 150 160 175 200 200 200
12 10 15 20 25 30 40 50 60 75 80 100 125 150 160 175 200 250 250 500
MIC
16 10 15 20 25 30 40 50 60 75 80 100 125 150 160 175 200 250 300 350 400 450 500 500 600
20 500 800
25 500 800
32 500 800
40 500 800
MID
MIJ
- 8 10 15 20 25 30 40 50 60 75 80 100 100 -
10 10 15 20 25 30 40 50 60 75 80 100 100 -
12 10 15 20 25 30 40 50 60 75 80 100 125 150 160 175 200 200 -
MICD
MICJ
16 10 15 20 25 30 40 50 60 75 80 100 125 150 160 175 200 250 300 300 -
20 10 15 20 25 30 40 50 60 75 80 100 125 150 160 175 200 250 300 300 -
25 10 15 20 25 30 40 50 60 75 80 100 125 150 160 175 200 250 300 300 -
32 10 15 20 25 30 40 50 60 75 80 100 125 150 160 175 200 250 300 350 400 450 500 500 -
40 500 -
Bore size(mm) Standard Stroke(mm)
MSI
MTI
8 10 15 20 25 30 40 50
10 10 15 20 25 30 40 50
12 10 15 20 25 30 40 50
16 10 15 20 25 30 40 50 60 75 80 100
20 10 15 20 25 30 40 50 60 75 80 100 125 150
25 10 15 20 25 30 40 50 60 75 80 100 125 150
32 10 15 20 25 30 40 50 60 75 80 100 125 150
40 10 15 20 25 30 40 50 60 75 80 100 125 150

Product Feature:

1.In accordance with ISO6432 standard(Φ8~Φ25).

2.Front and back cover owns fixed bumper pad which can reduce the impact of direction-change of the cylinder.

3.There are several mode of back cover, which makes the installation of cylinder more convenient.

4.Front and back cover and stainless steel block adopt riveted rolling packed structure to form a reliable connection.

5.Piston rod and cylinder body with the material of stainless steel make the cylinder adapt general working environment with corrosivity.

6.There are cylinders and accessories with several specifications for installation for your choice.

Installation & Usage:
1. When load changes in the work, the cylinder with abundant output capacity shall be ed.

2.Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion.

3.Necessary protection measure shall be taken in the environment with higher humidity, much dust or water drops, oil dust and welding dregs.

4.Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.

5.The medium used by cylinder shall be filtered to 40μm or below.

6.Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.

7.The cylinder shall be carried out test run without load before application. Prior to run, buffer shall be turned to the minimum and gradually released to avoid the damage on cylinder caused by excessive impact.

8.The cylinder shall avoid the influence of side load in operation to maintain the normal work of cylinder and extend the service life.

9. If the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment to the  surface. Anti-dust caps shall be added in air inlet and outlet ports.


Order Code:
6365242641521633602007796.jpg
Symbol:
MI Series.gif
Contact us
E-mail:info@fitsitech.com
Tel:+86-19928764188 
Add:Shangmei Times, 57 Longguan East Road, Tsinghua Community, Longhua Street, Longhua District, Shenzhen, China

     
Inquiry
Name:
E-mail:
Description:
CopyRight © 2010~2017 Shenzhen Fitsi Technology Co.,LTD All Right Reserved.     Sitemap    粤ICP备14001694号-由万创科技提供技术支持