Products
Mimi Cylinder
AirTAC MI Series MI12X125 MI12X150 MI12X175 MI12X200 Mini-cylinder Air Cylinder Pneumatic Air Tools
  • double acting cylinder
  • double acting pneumatic cylinder
  • festo pneumatic cylinder
  • smc pneumatic cylinder
AirTAC MI Series MI12X125 MI12X150 MI12X175 MI12X200 Mini-cylinder Air Cylinder Pneumatic Air Tools

Product Name: MI Series MI Cyclinder
Product Model: MI12X125 MI12X150 MI12X175 MI12X200
Valve Type: MI Cyclinder, Cyclinder
Brand: AirTAC
Fluid: Air
Acting Type: Double Acting, Single Acting Pull, Single Acting Push



Download:
Specification:

Specification:

Bore size: 8 10 12 16 20 25 32 40
Acting type: Double Acting, Single Acting Pull, Single Acting Push
- Double Acting with Cushion
Fluid:
Air(to be filtered by 40μm filter element)
Operating Pressure: Double Acting: 0.1~1.0MPa(15~145psi)(1.0~10.0bar)
Single Acting: 0.2~1.0MPa(28~145psi)(2.0~10.0bar)
Proof pressure: 1.5MPa(215psi)(15bar)
Temperature(℃): -20~70
Speed rang (mm/s): Double Acting: 30~800  Single Acting: 50~800
Stroke tolerance: 0~150(0~+1.0) >150(0~+1.4)
Cushion Type: MIC Series: Variable Cushion  Other Series: Bumper
Port Size: M5x0.8 PT1/8
PT1/4


 Stroke:

Bore size(mm) Standard Stroke(mm) Max Stroke(mm) Allow Stroke(mm)
MI
-
8 10 15 20 25 30 40 50 60 75 80 100 125 150
150 200
10 10 15 20 25 30 40 50 60 75 80 100 125 150 160 175 200 200 200
12 10 15 20 25 30 40 50 60 75 80 100 125 150 160 175 200 250 250 500
MIC
16 10 15 20 25 30 40 50 60 75 80 100 125 150 160 175 200 250 300 350 400 450 500 500 600
20 500 800
25 500 800
32 500 800
40 500 800
MID
MIJ
- 8 10 15 20 25 30 40 50 60 75 80 100 100 -
10 10 15 20 25 30 40 50 60 75 80 100 100 -
12 10 15 20 25 30 40 50 60 75 80 100 125 150 160 175 200 200 -
MICD
MICJ
16 10 15 20 25 30 40 50 60 75 80 100 125 150 160 175 200 250 300 300 -
20 10 15 20 25 30 40 50 60 75 80 100 125 150 160 175 200 250 300 300 -
25 10 15 20 25 30 40 50 60 75 80 100 125 150 160 175 200 250 300 300 -
32 10 15 20 25 30 40 50 60 75 80 100 125 150 160 175 200 250 300 350 400 450 500 500 -
40 500 -
Bore size(mm) Standard Stroke(mm)
MSI
MTI
8 10 15 20 25 30 40 50
10 10 15 20 25 30 40 50
12 10 15 20 25 30 40 50
16 10 15 20 25 30 40 50 60 75 80 100
20 10 15 20 25 30 40 50 60 75 80 100 125 150
25 10 15 20 25 30 40 50 60 75 80 100 125 150
32 10 15 20 25 30 40 50 60 75 80 100 125 150
40 10 15 20 25 30 40 50 60 75 80 100 125 150

Product Feature:

1.In accordance with ISO6432 standard(Φ8~Φ25).

2.Front and back cover owns fixed bumper pad which can reduce the impact of direction-change of the cylinder.

3.There are several mode of back cover, which makes the installation of cylinder more convenient.

4.Front and back cover and stainless steel block adopt riveted rolling packed structure to form a reliable connection.

5.Piston rod and cylinder body with the material of stainless steel make the cylinder adapt general working environment with corrosivity.

6.There are cylinders and accessories with several specifications for installation for your choice.

Installation & Usage:
1. When load changes in the work, the cylinder with abundant output capacity shall be ed.

2.Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion.

3.Necessary protection measure shall be taken in the environment with higher humidity, much dust or water drops, oil dust and welding dregs.

4.Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.

5.The medium used by cylinder shall be filtered to 40μm or below.

6.Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.

7.The cylinder shall be carried out test run without load before application. Prior to run, buffer shall be turned to the minimum and gradually released to avoid the damage on cylinder caused by excessive impact.

8.The cylinder shall avoid the influence of side load in operation to maintain the normal work of cylinder and extend the service life.

9. If the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment to the  surface. Anti-dust caps shall be added in air inlet and outlet ports.


Order Code:
6365242641521633602007796.jpg
Symbol:
MI Series.gif
MI12X10CA MI12X100SCA MI12X60SR MI12X40SU MI12X250U MI12X10SCM
MI12X15CA MI12X125SCA MI12X70SR MI12X60SU MI12X160SU MI12X15SCM
MI12X20CA MI12X150SCA MI12X80SR MI12X80SU MI12X175SU MI12X20SCM
MI12X25CA MI12X10R MI12X100SR MI12X125SU MI12X200SU MI12X25SCM
MI12X30CA MI12X15R MI12X125SR MI12X160CA MI12X250SU MI12X30SCM
MI12X40CA MI12X20R MI12X150SR MI12X175CA MI12X10CM MI12X40SCM
MI12X50CA MI12X25R MI12X10U MI12X200CA MI12X15CM MI12X50SCM
MI12X60CA MI12X30R MI12X15U MI12X250CA MI12X20CM MI12X60SCM
MI12X70CA MI12X40R MI12X20U MI12X160SCA MI12X25CM MI12X75SCM
MI12X80CA MI12X50R MI12X25U MI12X175SCA MI12X30CM MI12X80SCM
MI12X100CA MI12X60R MI12X30U MI12X200SCA MI12X40CM MI12X100SCM
MI12X125CA MI12X70R MI12X40U MI12X250SCA MI12X50CM MI12X125SCM
MI12X150CA MI12X80R MI12X50U MI12X160R MI12X60CM MI12X150SCM
MI12X10SCA MI12X100R MI12X60U MI12X175R MI12X75CM MI12X160SCM
MI12X15SCA MI12X125R MI12X75U MI12X200R MI12X80CM MI12X175SCM
MI12X20SCA MI12X150R MI12X80U MI12X250R MI12X100CM MI12X200SCM
MI12X25SCA MI12X10SR MI12X100U MI12X160SR MI12X125CM MI12X250SCM
MI12X30SCA MI12X15SR MI12X125U MI12X175SR MI12X150CM MI12X25SU
MI12X40SCA MI12X20SR MI12X150U MI12X200SR MI12X160CM MI12X50SU
MI12X50SCA MI12X25SR MI12X10SU MI12X250SR MI12X175CM MI12X75SU
MI12X60SCA MI12X30SR MI12X15SU MI12X160U MI12X200CM MI12X100SU
MI12X70SCA MI12X40SR MI12X20SU MI12X175U MI12X250CM MI12X150SU
MI12X80SCA MI12X50SR MI12X30SU MI12X200U
Contact us
E-mail:info@fitsitech.com
Tel:+86-19928764188 
Add:Shangmei Times, 57 Longguan East Road, Tsinghua Community, Longhua Street, Longhua District, Shenzhen, China

     
Inquiry
Name:
E-mail:
Description:
CopyRight © 2010~2017 Shenzhen Fitsi Technology Co.,LTD All Right Reserved.     Sitemap    粤ICP备14001694号-由万创科技提供技术支持