G Series
Original AirTAC GVR200-06 GVR200-08 GVR300-08 GVR300-10 GVR Series Vacuum Regulator
  • O1CN015vZ2811zAjuJv5xqz_!!681026674
  • O1CN017CVy0H1mdVlBGuLix_!!60524977
  • O1CN01eXzMOY1mdVl9oGeEc_!!60524977
  • O1CN01gcOXxc1zAjuH6Z5dA_!!681026674
  • O1CN01So3BUi1zAjuKOFhE1_!!681026674
Original AirTAC GVR200-06 GVR200-08 GVR300-08 GVR300-10 GVR Series Vacuum Regulator

Product Name:GVR Series Vacuum Regulator
Product Model:GVR200-06 GVR200-08 GVR300-08 GVR300-10
Fluid: Air
Pressure Range::-100~-1.3KPa
Max. Pressure: -1.0KPa
Temperature Range: -20~70℃

GVR200-06 GVR200-08 GVR300-08 GVR300-10
Fluid: Air
Port Size: PT1/8 PT1/4 PT1/4 PT3/8
Pressure Range: -100~-1.3KPa
Max. Pressure: -1.0KPa
Air injalation consumption 0.6L/min(ARN) and below
Temperature Range: -20~70℃
Weight: 204 198 342 336

①NPT thread and G thread are available.

Product Feature:

1. The pressed-in self-locking mechanism can prevent the abnormal movement of the set pressure caused by external interfere.

2. The pressure regulation is stable, the drift is small and the pressure characteristic is good.

3. In addition to panel installation, the bracket is optional for installation. 

Installation & Usage:

1. please be used with safety circuit to avoid accidents when power failure, vacuum pump and vacuum regulator fail.

2. When checking. please set the pressure to o (atmospheric pressure) and completely cut off the pressure of the vacuum pump before pulling down the tube af the regulator.

3. The vacuum regulator can not be used to regulate the pressure of the vacuum pump. if the flow capacity of the vacuum generator is less than the now capacity of the vacuum regulator. it is not suitable as a vacuum source.

4. Tne regulating knob rotates clockwise, the atmospheric pressure changes to the vacuum pressure, turns counterclockwise, the vacuum pressure changes to atmospheric pressure.

5 After setting the pressure, press the button on the pressure adjusting button until you hear the click.

6. The vacuum regulator is used for negative pressure, and no positive pressure should be applied.

Order Code:




Contact us
Add:Shangmei Times, 57 Longguan East Road, Tsinghua Community, Longhua Street, Longhua District, Shenzhen, China

CopyRight © 2010~2017 Shenzhen Fitsi Technology Co.,LTD All Right Reserved.     Sitemap    粤ICP备14001694号-由万创科技提供技术支持