Products
Multi-mount Cylinder、Twin-rod Cylinder、Tri-rod Cylinder
AirTac TN Series Pneumatic Double Shaft Cylinder TN20X10S TN20X20S TN20X30S TN20X40S TN20X50S Twin-rod Air Cylinder
  • 3-5
  • 1-5
  • 2-5
  • 4-5
  • 5-5
AirTac TN Series Pneumatic Double Shaft Cylinder TN20X10S TN20X20S TN20X30S TN20X40S TN20X50S Twin-rod Air Cylinder

Product Name: TN Series Twin-rod Air Cylinder
Product Model: TN20X10S TN20X20S TN20X30S TN20X40S TN20X50S
Valve Type: Twin-rod Air Cylinder, Cyclinder
Brand: AirTAC
Fluid: Air
Acting Type: Double Acting



Download:
Specification:

Specification:

Bore size: 10 16 20 25 32
Acting type: Double Acting
Fluid:
Air(to be filtered by 40μm filter element)
Operating Pressure: 0.1~1.0MPa(15~145psi)
Proof pressure: 1.5MPa(215psi)
Temperature(℃): -20~70
Speed rang (mm/s): 30~500 
Adjustable Stroke(mm):
-10~0
Stroke tolerance: (0~+1.0) 
Cushion Type: Burmper
Non-rotating Tolerance: ±0.4° ±0.3°
Port Size: M5X0.8
PT1/8

①Non-rotary accuracy of the cylinder fully retracted state, the cylinder fixed plate can be rotated angle;
②PT thread, NPT thread and G thread are available.


Stroke:

Bore size(mm) Standard Stroke(mm) Max Stroke(mm)
10

10 20 30 40 50 60 70 80 90 100 100
16 10 20 30 40 50 60 70 80 90 100 125 150 175 200 200
20 10 20 30 40 50 60 70 80 90 100 125 150 175 200 200
25 10 20 30 40 50 60 70 80 90 100 125 150 175 200 200
32 10 20 30 40 50 60 70 80 90 100 125 150 175 200 200

The 100mm range of non-standard travel range of more than a standard stroke restructuring, its dimensions for the previous standard stroke cylinder dimensions. Such as the stroke of 28 non-standard stroke cylinder is a standard stroke of 30 standard cylinder restructuring, its dimensions and the same.




Product Feature:

1.Enterprises standard is implemented.

2.Embeded installation and fixation mode saves the installation space.

3.It is good resistance to bending and twisting moments.

4. Mounting holes on three sides facilitates multi-position mounting.

5.Bumper in front of the barrel can adjust the stroke of cylinder and relieve impact.

6.Standard configuration of this series has magnet and the type without magnet is not available.

Installation & Usage:
1. When load changes in the work, the cylinder with abundant output capacity shall be ed.

2.Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion.

3.Necessary protection measure shall be taken in the environment with higher humidity, much dust or water drops, oil dust and welding dregs.

4.Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.

5.The medium used by cylinder shall be filtered to 40μm or below.

6.Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.

7.The cylinder shall be carried out test run without load before application. Prior to run, buffer shall be turned to the minimum and gradually released to avoid the damage on cylinder caused by excessive impact.

8.The cylinder shall avoid the influence of side load in operation to maintain the normal work of cylinder and extend the service life.

9. If the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment to the  surface. Anti-dust caps shall be added in air inlet and outlet ports.

Order Code:
TN Series.jpg
Symbol:
TN Series.gif
TN20X70S TN16X25S TN20X30S TN25X30S TN32X25S
TN10X10S TN16X30S TN20X40S TN25X40S TN32X50S
TN10X20S TN16X50S TN20X50S. TN25X50S TN32X50S
TN10X25S TN16X75S TN20X50S TN25X50S TN32X60S
TN10X50S TN16X100S TN20X75S TN25X60S TN32X70S
TN10X75S TN16X150S TN20X100S TN25X75S TN32X75S
TN10X100S TN16X200S TN20X150S TN25X100S TN32X80S
TN16X10S TN20X20S TN20X200S TN25X150S TN32X100S
TN16X20S TN20X25S TN25X25S TN25X200S TN32X150S
TN16X40-S TN32X200S
Contact us
E-mail:info@fitsitech.com
Tel:+86-19928764188 
Add:Shangmei Times, 57 Longguan East Road, Tsinghua Community, Longhua Street, Longhua District, Shenzhen, China

     
Inquiry
Name:
E-mail:
Description:
CopyRight © 2010~2017 Shenzhen Fitsi Technology Co.,LTD All Right Reserved.     Sitemap    粤ICP备14001694号-由万创科技提供技术支持