Products
Multi-mount Cylinder、Twin-rod Cylinder、Tri-rod Cylinder
AirTAC TCL Series TCL Tri-rod Cyclinder TCL20X225 TCL20X250 TCL25X20 TCL25X25 TCL25X30 Pneumatic Air Cylinder
  • 1-1
  • 2-1
  • 3-1
  • 4-1
  • 5-1
  • 6
AirTAC TCL Series TCL Tri-rod Cyclinder TCL20X225 TCL20X250 TCL25X20 TCL25X25 TCL25X30 Pneumatic Air Cylinder

Product Name: TCL TCM Series Tri-rod Cyclinder
Product Model: TCL20X225 TCL20X250 TCL25X20 TCL25X25 TCL25X30
Valve Type: Tri-rod Cyclinder, Cyclinder
Brand: AirTAC
Fluid: Air
Acting Type: Double Acting



Download:
Specification:

Specification:

Bore size: 12 16 20 25 32 40 50 63
Acting type: Double Acting
Fluid:
Air(to be filtered by 40μm filter element)
Operating Pressure: 0.1~1.0MPa(15~145psi)
Proof pressure: 1.5MPa(215psi)
Temperature(℃): -20~70
Speed rang (mm/s): 30~500 
Stroke tolerance: (0~+1.0) 
Cushion Type: Burmper
Non-rotating Tolerance: Linear Bearing: ±0.08° ±0.07° ±0.06° ±0.05°
Brozen Bearing: ±0.10° ±0.09° ±0.08° ±0.06°
Port Size: M5X0.8
PT1/8 PT1/4

①Non-rotary accuracy of the cylinder fully retracted state, the cylinder fixed plate can be rotated angle;
②PT thread, NPT thread and G thread are available.


Stroke:

Bore size(mm) Standard Stroke(mm) Max Stroke(mm)
12

10 20 25 30 40 50 60 70 75 80 90 100 125 150 150
16 10 20 25 30 40 50 60 70 75 80 90 100 125 150 175 200 200
20/25 20 25 30 40 50 60 70 75 80 90 100 125 150 175 200 225 250 250
32/40/50/63 25 30 40 50 60 70 75 80 90 100 125 150 175 200 225 250 250

① Different from the standard stroke 1 ~ 5mm non-standard stroke cylinder, cylinder from the previous standard stroke restructuring, the same size and shape.

Such as the trip for the 86 non-standard stroke cylinder is a standard stroke of 90 standard cylinder restructuring, its dimensions and the same;

However, the non-standard stroke cylinder with a stroke of 84 differs from the standard stroke 90 of the previous stage by 6mm, and can only be ordered in non-standard form.

Product Feature:

1. JIS standard is implemented.

2. Two guides of special bearing steel and linear bearing or bronze bearing guide are used to prevent rotating. They can bear high torque and radial load.

    ★Note: Steel ball linear bearing: It is suitable for elevation action of cylinder or the situation requiring high precision and high bearing ability, especially for the situation requiring low fraction action process.

      Bronze sliding bearing: it is suitable for the action that has radial load resistance. Compared with normal cylinder of same use, the horizontal impact resistance is doubled and it has stronger torsion rigidity.

3. Drive unit and guide unit are in the same barrel that no additional accessories are needed with minimal space required. The air intake is optional and it is convenient to install.

4. The bottom, back side and fixing plate of main body respectively has two exact orientation orifices (See ΦPA orifice and the orifice in XX point), which can provide orientation installation with high precision for the special situation.

5. Options of switch mounting with provision 4 mounting slots.

6. Special design of main body provides multi-mount;

Installation & Usage:

1.When load changes in the work, the cylinder with abundant output capacity shall be ed.

2.Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion.

3.Necessary protection measure shall be taken in the environment with higher humidity, much dust or water drops, oil dust and welding dregs.

4.Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.

5.The medium used by cylinder shall be filtered to 40μm or below.

6.Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.

7.The cylinder shall be carried out test run without load before application. Prior to run, buffer shall be turned to the minimum and gradually released to avoid the damage on cylinder caused by excessive impact.

8.The cylinder shall avoid the influence of side load in operation to maintain the normal work of cylinder and extend the service life.

9.If the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment to the  surface. Anti-dust caps shall be added in air inlet and outlet ports.


Order Code:
TCM Series.jpg
Symbol:
TCL Series.jpg
TCL12X25S TCL20X150S TCL32X150S TCL50X150S TCL80X60S TCL100X40S
TCL12X50S TCL20X200S TCL32X200S TCL50X200S TCL80X70S TCL100X50S
TCL12X75S TCL20X250S TCL32X250S TCL50X250S TCL80X75S TCL100X60S
TCL12X100S TCL25X25S TCL40X25S TCL63X25S TCL80X80S TCL100X70S
TCL12X150S TCL25X50S TCL40X50S TCL63X50S TCL80X90S TCL100X75S
TCL16X25S TCL25X75S TCL40X75S TCL63X75S TCL80X100S TCL100X80S
TCL16X50S TCL25X100S TCL40X100S TCL63X100S TCL80X125S TCL100X90S
TCL16X75S TCL25X150S TCL40X150S TCL63X150S TCL80X150S TCL100X100S
TCL16X100S TCL25X200S TCL40X200S TCL63X200S TCL80X175S TCL100X125S
TCL16X150S TCL25X250S TCL40X250S TCL63X250S TCL80X200S TCL100X150S
TCL20X25S TCL32X25S TCL50X25S TCL80X25S TCL80X225S TCL100X175S
TCL20X50S TCL32X50S TCL50X50S TCL80X30S TCL80X250S TCL100X200S
TCL20X75S TCL32X75S TCL50X75S TCL80X40S TCL100X25S TCL100X225S
TCL20X100S TCL32X100S TCL50X100S TCL80X50S TCL100X30S TCL100X250S
Contact us
E-mail:info@fitsitech.com
Tel:+86-19928764188 
Add:Shangmei Times, 57 Longguan East Road, Tsinghua Community, Longhua Street, Longhua District, Shenzhen, China

     
Inquiry
Name:
E-mail:
Description:
CopyRight © 2010~2017 Shenzhen Fitsi Technology Co.,LTD All Right Reserved.     Sitemap    粤ICP备14001694号-由万创科技提供技术支持