Products
Multi-mount Cylinder、Twin-rod Cylinder、Tri-rod Cylinder
AirTAC MD Series High Guide Precision Multi Mount Cylinder MD16X5 MD16X10 MD16X15 MD16X20 MD16X25
  • parker pneumatic cylinder
  • pneumatic cylinder calculator
  • pneumatic cylinder parts
  • rodless pneumatic cylinder
AirTAC MD Series High Guide Precision Multi Mount Cylinder MD16X5 MD16X10 MD16X15 MD16X20 MD16X25

Product Name: MD、MDD、MDJ、MSD、MTD Series Multi-Mount Cyclinder
Product Model: MD16X5 MD16X10 MD16X15 MD16X20 MD16X25
Valve Type: Multi-Mount Cyclinder, Cyclinder
Brand: AirTAC
Fluid: Air
Acting Type: Double Acting、Single Acting Push、Single Acting Pull



Download:
Specification:

Specification:

Bore size: 6 10 16 20 25 32
Acting type: MD/MDD/MDJ Double Acting
MSD/MTD Single Acting Push、Single Acting Pull
Fluid:
Air(to be filtered by 40μm filter element)
Operating Pressure: Double Acting: 0.1~1.0MPa(15~145psi)(1.0~10.0bar)
Single Acting: 0.2~1.0MPa(28~145psi)(2.0~10.0bar)
Proof pressure: 1.5MPa(215psi)
Temperature(℃): -20~80
Speed rang (mm/s): Double Acting: 30~500      Single Acting:50~500
Stroke tolerance: (0~+1.0) 
Cushion Type: Bumper
Port Size: M5X0.8 PT1/8

① PT thread, NPT thread and G thread are available.
Stroke:

Bore size(mm) Standard Stroke(mm) Max Stroke(mm) Allow Stroke(mm)
6

Double Acting:  5 10 15 20 25 30 35 35 40
Single Acting: 5 10 15 20 20
-
10 Double Acting: 5 10 15 20 25 30 35 35 40
Single Acting: 5 10 15 20 20 -
16
Double Acting:  5 10 15 20 25 30 40 50 50 70
Single Acting: 5 10 15 20 20 -
20 Double Acting:  5 10 15 20 25 30 40 50 60 60 80
Single Acting: 5 10 15 20 20 -
25 Double Acting:  5 10 15 20 25 30 40 50 60 60 80
Single Acting: 5 10 15 20 20 -
32 Double Acting:  5 10 15 20 25 30 40 50 60 60 80
Single Acting: 5 10 15 20 20
-

① other special itinerary please contact with the company;

② The max range of non-standard travel range of more than a standard stroke restructuring, its dimensions for the previous standard stroke cylinder dimensions. Such as the stroke of 23 non-standard stroke cylinder is a standard stroke of 25 standard cylinder restructuring, its dimensions and the same.


Product Feature:

1.Manufactured by our enterprise.

2.There are several ways to fix the cylinder and it is convenient to install and use.

3.Several cylinders can be assembled together to  effectively save the installation space.

4.The guide precision of piston rod is high and no additional lubricant is needed.

5.Cylinders of various specifications are optional.

6.The seal material with high temperature resistance is adopted to guarantee the normal operation of cylinder at 150℃(Option).


Installation & Usage:

1. When load changes in the work, the cylinder with abundant output capacity shall be ed.

2.Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion.

3.Necessary protection measure shall be taken in the environment with higher humidity, much dust or water drops, oil dust and welding dregs.

4.Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.

5.The medium used by cylinder shall be filtered to 40μm or below.

6.Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.

7.The cylinder shall be carried out test run without load before application. Prior to run, buffer shall be turned to the minimum and gradually released to avoid the damage on cylinder caused by excessive impact.

8.The cylinder shall avoid the influence of side load in operation to maintain the normal work of cylinder and extend the service life.

9. If the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment to the  surface. Anti-dust caps shall be added in air inlet and outlet ports.

Order Code:
MD系列.jpg
Symbol:
MD Series.gif
MD16X5 MD16X30 MD16X5S MD16X30S
MD16X10 MD16X35 MD16X10S MD16X35S
MD16X15 MD16X40 MD16X15S MD16X40S
MD16X20 MD16X45 MD16X20S MD16X45S
MD16X25 MD16X50 MD16X25S MD16X50S
Contact us
E-mail:info@fitsitech.com
Tel:+86-19928764188 
Add:Shangmei Times, 57 Longguan East Road, Tsinghua Community, Longhua Street, Longhua District, Shenzhen, China

     
Inquiry
Name:
E-mail:
Description:
CopyRight © 2010~2017 Shenzhen Fitsi Technology Co.,LTD All Right Reserved.     Sitemap    粤ICP备14001694号-由万创科技提供技术支持