Product Name: MA Series Mi Cyclinder Product Model: MA40X25 MA40X50 MA40X75 MA40X100 MA40X125 Valve Type: Mi Cyclinder, Cyclinder Brand: AirTAC Fluid: Air Acting: Double Acting、Single Acting
Specification：
| Bore size: | 16 | 20 | 25 | 32 | 40 | 50 | 63 | |
| Acting type: | MSA/MTA: | Single Acting | - | |||||
| MA/MAD/MAJ: | Double Acting |
- |
||||||
| MAR: | - | Double Acting | ||||||
| MAC/MACD/MACJ: | - | Double Acting with Cushion | ||||||
|
Fluid: |
Air(to be filtered by 40μm filter element) | |||||||
| Operating Pressure: | Double Acting: | 0.1~1.0MPa（15~145psi）(1.0~10.0bar) | ||||||
| Single Acting: |
0.2~1.0MPa（28~145psi）(1.0~10.0bar) |
|||||||
| Proof pressure: | 1.5MPa（215psi）(15bar) | |||||||
| Temperature（℃）: | -20~70 | |||||||
| Speed rang (mm/s): | Double Acting: 30~800 Single Acting：50~800 | |||||||
| Stroke tolerance： | 0~150(0~+1.0) >150(0~+1.4) | |||||||
| Cushion Type: | MAC/MACD/MACJ Series: Adjustable Cushion Other Series: Bumper | |||||||
| Port Size： | M5X0.8 | PT1/8 | PT1/4 | |||||
① PT thread, NPT thread and G thread are available.
Stroke：
| Bore size(mm) | Standard Stroke(mm) | Max Stroke(mm) | Allow Stroke(mm) | ||
|
MA |
- | 16 | 25 50 75 100 125 150 160 175 200 250 300 350 400 450 500 | 500 | 600 |
|
MAC MAR |
20 | 25 50 75 100 125 150 160 175 200 250 300 350 400 450 500 | 500 | 800 | |
| 25 | 25 50 75 100 125 150 160 175 200 250 300 350 400 450 500 | 500 | 800 | ||
| 32 | 25 50 75 100 125 150 160 175 200 250 300 350 400 450 500 | 500 | 800 | ||
| 40 | 25 50 75 100 125 150 160 175 200 250 300 350 400 450 500 | 500 | 800 | ||
| - | 50 | 25 50 75 100 125 150 160 175 200 250 300 350 400 450 500 | 500 | 800 | |
| - | 63 | 25 50 75 100 125 150 160 175 200 250 300 350 400 450 500 | 500 | 800 | |
|
MAD MAJ |
- | 16 | 25 50 75 100 125 150 160 175 200 250 300 | 300 | - |
|
MACD MACJ |
20 | 25 50 75 100 125 150 160 175 200 250 300 | 300 | - | |
| 25 | 25 50 75 100 125 150 160 175 200 250 300 | 300 | - | ||
| 32 | 25 50 75 100 125 150 160 175 200 250 300 350 400 450 500 | 500 | - | ||
| 40 | 25 50 75 100 125 150 160 175 200 250 300 350 400 450 500 | 500 | - | ||
| - | 50 | 25 50 75 100 125 150 160 175 200 250 300 350 400 450 500 | 500 | - | |
| - | 63 | 25 50 75 100 125 150 160 175 200 250 300 350 400 450 500 | 500 | - | |
| Bore size(mm) | Standard Stroke(mm) | |
| MSA | 16 | 25 50 75 100 |
| 20 | 25 50 75 100 | |
| 25 | 25 50 75 100 125 150 | |
| 32 | 25 50 75 100 125 150 | |
| 40 | 25 50 75 100 125 150 | |
|
MTA |
16 | 25 50 75 100 |
| 20 | 25 50 75 100 | |
| 25 | 25 50 75 100 | |
| 32 | 25 50 75 100 | |
| 40 | 25 50 75 100 | |
1.Standard cylinder manufactured by our enterprise.
2.Piston adopts heterogeneous two-way seal structure. It has compact size and has the function of grease reservation.
3.Front cover has fixed bumper which can reduce the impact of direction change of the cylinder.
4.There are several modes of back cover, which makes the installation of cylinder more convenient.
5.Front and back cover and stainless steel block adopt riveted rolling packed structure to form a reliable connection.
6.The cylinder body has stainless steel pipes with high precision to produce high strength and corrosion resistance.
7.There are cylinders and mounting accessories with several specifications for your choice.
8.All cylinders of this series have magnet.
1. When load changes in the work, the cylinder with abundant output capacity shall be ed.
2.Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion.
3.Necessary protection measure shall be taken in the environment with higher humidity, much dust or water drops, oil dust and welding dregs.
4.Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.
5.The medium used by cylinder shall be filtered to 40μm or below.
6.Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.
7.The cylinder shall be carried out test run without load before application. Prior to run, buffer shall be turned to the minimum and gradually released to avoid the damage on cylinder caused by excessive impact.
8.The cylinder shall avoid the influence of side load in operation to maintain the normal work of cylinder and extend the service life.
9. If the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment to the surface. Anti-dust caps shall be added in air inlet and outlet ports.
| MA16X25SCA | MA16X400SU | MA20X300SU | MA25X250SCA | MA32X150SCA. | MA40X75SCA. |
| MA16X25SCM | MA16X500SCA | MA20X400SCA | MA25X250SCM | MA32X150SCM | MA40X75SCM |
| MA16X25SU | MA20X25SCA. | MA20X400SCM | MA25X250SU | MA32X150SU | MA40X75SU |
| MA16X50SCA | MA20X25SCM | MA20X400SU | MA25X300SCA | MA32X200SCA | MA40X100SCA. |
| MA16X50SCM | MA20X25SU | MA20X500SCA | MA25X300SCM | MA32X200SCM | MA40X100SCM |
| MA16X50SU | MA20X50SCA. | MA20X500SCM | MA25X300SU | MA32X200SU | MA40X100SU |
| MA16X75SCA. | MA20X50SCM | MA25X25SCA. | MA25X400SCA | MA32X250SCA | MA40X150SCA. |
| MA16X75SCM | MA20X50SU | MA25X25SCM | MA25X400SCM | MA32X250SCM | MA40X150SCM |
| MA16X75SU | MA20X75SCA. | MA25X25SU | MA25X400SU | MA32X250SU | MA40X150SU |
| MA16X100SCA. | MA20X75SCM | MA25X50SCA. | MA25X500SCA | MA32X300SCA | MA40X200SCA |
| MA16X100SCM | MA20X75SU | MA25X50SCM | MA25X500SCM | MA32X300SCM | MA40X200SCM |
| MA16X100SU | MA20X100SCA. | MA25X50SU | MA25X500SU | MA32X300SU | MA40X200SU |
| MA16X150SCA. | MA20X100SCM | MA25X75SCA. | MA32X25SCA. | MA32X400SCA | MA40X250SCA |
| MA16X150SCM | MA20X100SU | MA25X75SCM | MA32X25SCM | MA32X400SCM | MA40X250SCM |
| MA16X150SU | MA20X150SCA. | MA25X75SU | MA32X25SU | MA32X400SU | MA40X250SU |
| MA16X200SCA | MA20X150SCM | MA25X100SCA. | MA32X50SCA | MA32X500SCA | MA40X300SCA |
| MA16X200SCM | MA20X150SU | MA25X100SCM | MA32X50SCM | MA32X500SCM | MA40X300SCM |
| MA16X200SU | MA20X200SCA | MA25X100SU | MA32X50SU | MA32X500SU | MA40X300SU |
| MA16X250SCA | MA20X200SCM | MA25X150SCA. | MA32X75SCA. | MA40X25SCA. | MA40X400SCA |
| MA16X250SCM | MA20X200SU | MA25X150SCM | MA32X75SCM | MA40X25SCM | MA40X400SCM |
| MA16X250SU | MA20X250SCA | MA25X150SU | MA32X75SU | MA40X25SU | MA40X400SU |
| MA16X300SCA | MA20X250SCM | MA25X200SCA | MA32X100SCA | MA40X50SCA. | MA40X500SCA |
| MA16X300SCM | MA20X250SU | MA25X200SCM | MA32X100SCM | MA40X50SCM | MA40X500SCM |
| MA16X300SU | MA20X300SCA | MA25X200SU | MA32X100SU | MA40X50SU | MA40X500SU |
| MA16X400SCA | MA20X300SCM |
