Products
Compact Cyinder
AirTAC ACQ Series Compact Thin Air Cylinder ACQ100X60 ACQ100X70 ACQ100X75 ACQ100X80 ACQ100X90 Air Cylinder
  • hydraulic cylinder seals
  • hydraulic jack
  • hydraulic piston cylinder
  • hydraulic ram cylinder
  • rebuild hydraulic cylinder
AirTAC ACQ Series Compact Thin Air Cylinder ACQ100X60 ACQ100X70 ACQ100X75 ACQ100X80 ACQ100X90 Air Cylinder

Product Name: ACQ Series Thin Air Cylinder
Product Model: ACQ100X60 ACQ100X70 ACQ100X75 ACQ100X80 ACQ100X90
Valve Type: Thin Air Cylinder, Cyclinder
Brand: AirTAC
Fluid: Air
Acting Type: Double Acting、 Single Acting Push、Single Acting Pull



Download:
Specification:

Specification:

Bore size: 12 16 20 25 32 40 50 63 80 100
Acting type: Double Acting
Single Acting Push、Single Acting Pull -
Fluid:
Air(to be filtered by 40μm filter element)
Operating Pressure: Double Acting: 0.1~1.0MPa(15~145psi)(1.0~10.0bar)
Single Acting: 0.2~1.0MPa(28~145psi)(2.0~10.0bar)
Proof pressure: 1.5MPa(215psi)
Temperature(℃): -20~80
Speed rang (mm/s): Double Acting: 30~500      Single Acting:50~500
Stroke tolerance: Stroke≤150(0~+1.0)    Stroke>150(0~+1.4)
Cushion Type: Bumper
Port Size: M5X0.8 PT1/8 PT1/4 PT3/8

① PT thread, NPT thread and G thread are available.
Stroke:

Bore size(mm) Standard Stroke(mm) Max Stroke(mm) Allow Stroke(mm)
Without magnetic With magnetic
12

Double Acting:  5 10 15 20 25 30 35 40 45 50 50 80 70
Single Acting: 5 10 15 20 20
- -
16 Double Acting:  5 10 15 20 25 30 35 40 45 50 55 60 80 70
Single Acting: 5 10 15 20 20 - -
20
25
Double Acting:  5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 90 100 100 140 130
Single Acting: 5 10 15 20 25 30 30 - -
32
40
50
63
Double Acting:  5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 90 100 100
100 100
Single Acting: 5 10 15 20 25 30
80
 100
Double Acting:  5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 90 100 100
- -

① other special itinerary please contact with the company;

② The max range of non-standard travel range of more than a standard stroke restructuring, its dimensions for the previous standard stroke cylinder dimensions. Such as the stroke of 23 non-standard stroke cylinder is a standard stroke of 25 standard cylinder restructuring, its dimensions and the same.


Product Feature:

1.JIS standard is implemented.

2.C clip  is adopted to connect the cylinder body and back cover or front cover, and riveted structure is adopted to connect piston and piston rod to make it compact and reliable.

3.The internal diameter of the body is treated with rolling followed by the treatment of hard anodizing, forming an excellent abrasion resistance and durability.

4.The seal of piston adopts heterogeneous two-way seal structure. It has compact dimension and the function of grease reservation.

5.Compact structure can effectively save installation space.

6.There are magnetic switch slots around the cylinder body, which is convenient to install inducting switch.

7.Installing accessories with various specifications are optional.

Installation & Usage:
1. When load changes in the work, the cylinder with abundant output capacity shall be ed.

2.Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion.

3.Necessary protection measure shall be taken in the environment with higher humidity, much dust or water drops, oil dust and welding dregs.

4.Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.

5.The medium used by cylinder shall be filtered to 40μm or below.
6.As both of the front cover and piston of the cylinder are short, typically too large stroke can not be ed.

7.Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.

8.The cylinder shall avoid the influence of side load in operation to maintain the normal work of cylinder and extend the service life.

9. If the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment to the  surface. Anti-dust caps shall be added in air inlet and outlet ports.

10.C clip Installation:

     10.1. Removal & Installation of C clip must be done with proper tool & care.

     10.2. Ensure C clip is securely fitted into the proper slot to prevent leakage.


Order Code:
ACQ Series.jpg
Symbol:
ACQ Series.gif
Contact us
E-mail:info@fitsitech.com
Tel:+86-19928764188 
Add:Shangmei Times, 57 Longguan East Road, Tsinghua Community, Longhua Street, Longhua District, Shenzhen, China

     
Inquiry
Name:
E-mail:
Description:
CopyRight © 2010~2017 Shenzhen Fitsi Technology Co.,LTD All Right Reserved.     Sitemap    粤ICP备14001694号-由万创科技提供技术支持