Product Name：4M Series Pneumatic Solenoid Valve Product Model：4M210-08 4M220-08 4M310-08 4M320-08 4M310-10 4M320-10 Valve Type：Solenold Valve, Directional valve Brand：AirTAC Fluid： Air Position & Way Number：5 Port 2 Position Acting： Internal pilot
| Model: | 4M110-M5 | 4M110-06 | 4M210-06 | 4M210-08 | 4M310-08 | 4M310-10 |
| 4M120-M5 | 4M120-06 | 4M220-06 | 4M220-08 | 4M320-08 | 4M320-10 | |
| Fluid: | Air(to be filtered by 40μm filter element) | |||||
| Acting: | Internal pilot | |||||
| Port Size: | In=Out=M5 | In=Out=1/8" | In=Out=1/8" | In=Out=1/4" | In=Out=1/4" | In=Out=3/8" |
| Orifice Size: | 5.5mm²(Cv=0.31) | 12.0mm²(Cv=0.67) | 14.0mm²(Cv=0.78) | 16.0mm²(Cv=0.89) | 25.0mm²(Cv=1.40) | 30.0mm²(Cv=1.67) |
| Valve Type: | 5 Port 2 Position | |||||
| Operating Pressure: | 0.15~0.8MPa(21~114psi) | |||||
| Proof Pressure: | 1.5MPa(215psi) | |||||
| Temperature: | -20~70 | |||||
| Material of Body: | Aluminum Alloy | |||||
| Lubrication: | Not Required | |||||
| Max Frequency: | 5 Cycle/Sec | 4 Cycle/Sec | ||||
| Weight: | 4M110:450g 4M120:175g | 4M210:220g 4M220:320g | 4M310:310g 4M320:400g | |||
Coil Specification:
| Item | 4M110 4M120 | 4M210 4M220 4M310 4M320 |
| Standard Voltage: | AC220V,AC110V,AC24V,DC24V,DC12V | |
| Scope of Voltage: | AC:±15% DC:±10% | |
| Power Consumption: | AC:2.5VA DC:2.5W | AC:3.5VA DC:3.0W |
| Protection: | IP65(DIN40050) | |
| Temperature Classification: | B Class | |
| Electrical Entry: | Termina,Grommet | |
| Activating Time: | 0.05 Sec and Below | |
① PT thread,NPT thread and G thread are available.
② Once lubricated air is used,continue with same medium to optimise valve life span. Lubricants like ISO VG32 or equivalent recommended.
③ The maximum actuation frequency is the no-load state.
1.Internal pilot structure.
2.Structure in sliding column mode: good tightness and sensitive reaction.
3.Double control solenoid valves have memory function.
4.Internal hole adopts special processing technology which has little attrition friction,
low start pressure and long service life.
5.No need to add oil for lubrication.
6.Install in the side plate with the surface upward, which can be usde by directly connecting with the actutators.
7.Affiliated manual devices are equipped to facilitate installation and debugging.
8.Several standard voltage grades are optional.
Installation & Usage:
1.Before installing, be sure the valve hasn't been damaged via transportation.
2.It's suggested to use the medium lubricated by 40μm filter element. Be aware of the flow direction and port size.
3.Please notice whether the installation condition accords with technical requirements (such as “voltage”, “actuation frequency”, “working pressure” and “scope of application temperature”), then the equipment can be installed and used.
4.Notice the flow direction of air during installation, P is the air intake, A (B) is the work port and R (S) is the exhaust outlet.
5.Take measure to avoid vibration and frozen.
6.Before using the fittings and tubes make sure they are clean. When connecting to fittings, be sure the PTFE Thread Seal Tape is used correctly.
7.To keep the dust away, please use the silencer for the exhaust ports. Never forget to install dirt-proof boot in air intake and outlet during dismounting.
8.After installing, please use the manual override to test valve first.
