Solenoid Valve
AirTAC 5 Position 5 Way 4M110-M5 4M120-M5 4M110-06 4M120-06 4M210-06 4M220-06 4M Series Pneumatic Solenoid Valve
  • O1CN01H8u6al1sr9HNVon1u_!!1921905819
  • O1CN01DLWr4L2BisqTvyFzb_!!713868373
  • O1CN017RcQuM2BisqNqA1Ey_!!713868373
  • O1CN0140hisS2BisqVXVG1z_!!713868373
AirTAC 5 Position 5 Way 4M110-M5 4M120-M5 4M110-06 4M120-06 4M210-06 4M220-06 4M Series Pneumatic Solenoid Valve

Product Name:4M Series Pneumatic Solenoid Valve
Product Model:4M110-M5 4M120-M5 4M110-06 4M120-06 4M210-06 4M220-06
Valve Type:Solenold Valve, Directional valve
Fluid: Air
Position & Way Number:5 Port 2 Position
Acting: Internal pilot

4M110-M5 4M110-06 4M210-06 4M210-08 4M310-08 4M310-10
4M120-M5 4M120-06 4M220-06 4M220-08 4M320-08 4M320-10
Fluid: Air(to be filtered by 40μm filter element)
Acting: Internal pilot 
Port Size: In=Out=M5
In=Out=1/8" In=Out=1/8" In=Out=1/4" In=Out=1/4" In=Out=3/8"
Orifice Size: 5.5mm²(Cv=0.31) 12.0mm²(Cv=0.67) 14.0mm²(Cv=0.78) 16.0mm²(Cv=0.89) 25.0mm²(Cv=1.40) 30.0mm²(Cv=1.67)
Valve Type: 5 Port 2 Position
Operating Pressure: 0.15~0.8MPa(21~114psi)
Proof Pressure: 1.5MPa(215psi)
Temperature: -20~70
Material of Body: Aluminum Alloy
Lubrication: Not Required
Max Frequency: 5 Cycle/Sec
4 Cycle/Sec
Weight: 4M110:450g 4M120:175g 4M210:220g 4M220:320g 4M310:310g 4M320:400g

Coil Specification:

Item 4M110 4M120 4M210 4M220 4M310 4M320
Standard Voltage: AC220V,AC110V,AC24V,DC24V,DC12V
Scope of Voltage: AC:±15% DC:±10%
Power Consumption: AC:2.5VA  DC:2.5W AC:3.5VA  DC:3.0W
Protection: IP65(DIN40050)
Temperature Classification: B Class
Electrical Entry: Termina,Grommet
Activating Time: 0.05 Sec and Below

① PT thread,NPT thread and G thread are available.
② Once lubricated air is used,continue with same medium to optimise valve life span. Lubricants like ISO VG32 or equivalent recommended.
③ The maximum actuation frequency is the no-load state.

Product Feature:

1.Internal pilot structure. 

2.Structure in sliding column mode: good tightness and sensitive reaction. 

3.Double control solenoid valves have memory function.

4.Internal hole adopts special processing technology which has little attrition friction, 

low start pressure and long service life.

5.No need to add oil for lubrication.

6.Install in the side plate with the surface upward, which can be usde by directly connecting with the actutators.

7.Affiliated manual devices are equipped to facilitate installation and debugging.

8.Several standard voltage grades are optional.

Installation & Usage:

1.Before installing, be sure the valve hasn't been damaged via transportation. 

2.It's suggested to use the medium lubricated by 40μm filter element. Be aware of the flow direction and port size. 

3.Please notice whether the installation condition accords with technical requirements (such as “voltage”, “actuation frequency”, “working pressure” and “scope of application temperature”), then the equipment can be installed and used. 

4.Notice the flow direction of air during installation, P is the air intake, A (B) is the work port and R (S) is the exhaust outlet. 

5.Take measure to avoid vibration and frozen. 

6.Before using the fittings and tubes make sure they are clean. When connecting to fittings, be sure the PTFE Thread Seal Tape is used correctly. 

7.To keep the dust away, please use the silencer for the exhaust ports. Never forget to install dirt-proof boot in air intake and outlet during dismounting. 

8.After installing, please use the manual override to test valve first. 

Order Code:




Contact us
Add:Shangmei Times, 57 Longguan East Road, Tsinghua Community, Longhua Street, Longhua District, Shenzhen, China

CopyRight © 2010~2017 Shenzhen Fitsi Technology Co.,LTD All Right Reserved.     Sitemap    粤ICP备14001694号-由万创科技提供技术支持