Products
Standard Cylinders
AirTAC Pneumatic Equipment SE100X700 SE100X800 SE100X900S Stabdard Cylinder
  • SE125X50S
  • SE80X50S
  • SE100X75S
  • SE100X50S
  • SE100X100S
AirTAC Pneumatic Equipment SE100X700 SE100X800 SE100X900S Stabdard Cylinder

Product Name: SE Series Stabdard Cylinder
Product Model: SE100X700 SE100X800 SE100X900S
Valve Type: Stabdard Cylinder, Air Cylinder
Brand: AirTAC
Fluid: Air
Mounting Type: Basic  FA  FB  CA  CB  CR  LB  TC  FTC  TCM1  TCM2
Acting: Double Acting
Cushion Type: Variable Cushion



Download:
Specification:

Specification:

Bore size: 32 40 50 63 80 100 125
Acting type: Double Acting
Fluid:
Air(to be filtered by 40μm filter element)
Mounting Type:
SE Basic  FA  FB  CA  CB  CR  LB  TC  FTC  TCM1  TCM2
SED、SEJ Basic  FA  FB  LC  FTC  TCM1  TCM2
Operating pressure: 0.10~1.0MPa(15~145psi)(1.0~10.0bar)
Proof pressure: 1.5MPa(215psi)(15bar)
Temperature(℃): -20~80
Speed rang (mm/s): 30~800 30~500
Stroke tolerance: 0~250(0~+0.1)  251~1000(0~+1.4)   1001~1500(0~+1.8)
Cushion Type: Variable Cushion
Adjustable Cushion Stroke mm: 27 30 36 40
Port Size: PT1/8 PT1/4 PT3/8 PT1/2

① PT thread, NPT thread and G thread are available.

Stroke:

Bore size(mm) Standard Stroke(mm) Max Stroke(mm) Allow Stroke(mm)
32 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 1000 1800
40 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 600 700 800 1200 1800
50 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 600 700 800 900 1000 1200 1800
63 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 600 700 800 900 1000 1500 1800
80 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 600 700 800 900 1000 1500 1800
100 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 600 700 800 900 1000 1500 1800
125 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 600 700 800 900 1000 1500 1800



Product Feature:

1.ISO15552 and VDMA24562 standard cylinder; 

2.The piston seal is composed of two Y-shape one-way seal structure, which has compensation function, long service life and low start-up pressure; 

3.The square aluminum pipe without tie rod has good corrosion resistance; 

4.The buffer adjustment of cylinder is smooth and steady; 

5.Cylinders and accessories for installation with several specifications are optional. 


Installation & Usage:

1.When load changes in the work, the cylinder with abundant output capacity shall be ed.

2.Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion.

3.Necessary protection measure shall be taken in the environment with higher humidity, much dust or water drops, oil dust and welding dregs.

4.Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.

5.The medium used by cylinder shall be filtered to 40μm or below.

6.Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.

7.The cylinder shall be carried out test run without load before application. Prior to run, buffer shall be turned to the minimum and gradually released to avoid the damage on cylinder caused by excessive impact.

8.The cylinder shall avoid the influence of side load in operation to maintain the normal work of cylinder and extend the service life.

9.If the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment to the  surface. Anti-dust caps shall be added in air inlet and outlet ports.

Order Code:
SE Series.jpg
Symbol:
6365112097990239126369048.jpg
Contact us
E-mail:info@fitsitech.com
Tel:+86-19928764188 
Add:Shangmei Times, 57 Longguan East Road, Tsinghua Community, Longhua Street, Longhua District, Shenzhen, China

     
Inquiry
Name:
E-mail:
Description:
CopyRight © 2010~2017 Shenzhen Fitsi Technology Co.,LTD All Right Reserved.     Sitemap    粤ICP备14001694号-由万创科技提供技术支持