Products
Standard Cylinders
Original AirTAC Pneumatic Cylinder SC250X25 SC250X50 SC250X75 SC200X1000S SC Series Standard Pneumatic Cylinder
  • graduated cylinder
  • janatics air cylinder
  • numatics air cylinder
Original AirTAC Pneumatic Cylinder SC250X25 SC250X50 SC250X75 SC200X1000S SC Series Standard Pneumatic Cylinder

Product Name: SC Series Stabdard Cylinders
Product Model: SC250X25 SC250X50 SC250X75 SC200X1000S
Valve Type: Stabdard Cylinders, Cyclinder
Brand: AiRTAC
Fluid: Air
Acting: Double Acting



Download:
Specification:

Specification:

Bore size: 32 40 50 63 80 100
Acting type: Double Acting
Fluid:
Air(to be filtered by 40μm filter element)
Mounting Type:
SC Basic  FA  FB  CA  CB  LB  TC  TCM1
SCD、SCJ Basic  FA  LB  TC  TCM1
Operating pressure: 0.10~1.0MPa(15~145psi)(1.0~10.0bar)
Proof pressure: 1.5MPa(215psi)(15bar)
Temperature(℃): -20~80
Speed rang (mm/s): 30~800
Stroke tolerance: 0~250(0~+0.1)  251~1000(0~+1.4)   1001~1500(0~+1.8)
Cushion Type: Variable Cushion
Adjustable Cushion Stroke mm: 21 28 29
Port Size: PT1/8 PT1/4 PT3/8 PT1/2

① PT thread, NPT thread and G thread are available.

Stroke:

Bore size(mm) Standard Stroke(mm) Max Stroke(mm) Allow Stroke(mm)
32 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 1000 2000
40 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 600 700 800 900 1000 1200 2000
50 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 600 700 800 900 1000 1200 2000
63 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 600 700 800 900 1000 1500 2000
80 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 600 700 800 900 1000 1500 2000
100 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 600 700 800 900 1000 1500 2000



Product Feature:

1.Standard cylinder manufactured by our enterprise.

2.The seal of piston adopts heterogeneous two way seal structure. It’s dimension is tight and it has the function of grease reservation.

3.It is tie rod cylinder. The cylinder barrel and front/rear cap is jointed by tie rods with high reliability.

4. Compared with ISO15552 standard cylinder, SC series cylinder with the same bore size is shorter.

5. The buffer adjustment of cylinder is smooth and steady.

6.Cylinders and mounting accessories with several specifications are optional.


Installation & Usage:
1. When load changes in the work, the cylinder with abundant output capacity shall be ed.

2.Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion.

3.Necessary protection measure shall be taken in the environment with higher humidity, much dust or water drops, oil dust and welding dregs.

4.Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.

5.The medium used by cylinder shall be filtered to 40μm or below.

6.Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.

7.The cylinder shall be carried out test run without load before application. Prior to run, buffer shall be turned to the minimum and gradually released to avoid the damage on cylinder caused by excessive impact.

8.The cylinder shall avoid the influence of side load in operation to maintain the normal work of cylinder and extend the service life.

9. If the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment to the  surface. Anti-dust caps shall be added in air inlet and outlet ports.

Order Code:
SC Series.jpg
Symbol:

6365248864635536212965942.gif

Contact us
E-mail:info@fitsitech.com
Tel:+86-19928764188 
Add:Shangmei Times, 57 Longguan East Road, Tsinghua Community, Longhua Street, Longhua District, Shenzhen, China

     
Inquiry
Name:
E-mail:
Description:
CopyRight © 2010~2017 Shenzhen Fitsi Technology Co.,LTD All Right Reserved.     Sitemap    粤ICP备14001694号-由万创科技提供技术支持