Products
Mimi Cylinder
AirTAC PB Series Air Cylinder PB4X5 PB4X10 PB4X15 PB4X20 PB6X5S Mini Pneumatic Air Cylinder
  • PDB10X30
  • PBJ10X30
  • PSB10X30
  • PB10X30
  • PBD10X30
AirTAC PB Series Air Cylinder PB4X5 PB4X10 PB4X15 PB4X20 PB6X5S Mini Pneumatic Air Cylinder

Product Name: PB Series MI Cyclinder
Product Model: PB4X5 PB4X10 PB4X15 PB4X20 PB6X5S
Valve Type: MI Cyclinder, Cyclinder
Brand: AirTAC
Fluid: Air
Acting Type: Double Acting, Single Acting Pull, Single Acting Push



Download:
Specification:

Specification:

Bore size: 4 6 10 12 16
Acting type: Double Acting, Single Acting Push Double Acting, Single Acting Pull, Single Acting Push
Fluid:
Air(to be filtered by 40μm filter element)
Operating Pressure: Double Acting: 0.2~0.7MPa(28~100psi)(2.0~7.0bar) 0.1~0.7MPa(15~100psi)(1.0~7.0bar)
Single Acting: 0.3~0.7MPa(36~100psi)(3.0~7.0bar) 0.2~0.7MPa(28~100psi)(2.0~7.0bar)
Proof pressure: 1.1MPa(160psi)(11bar)
Temperature(℃): -20~70
Speed rang (mm/s): 50~500    50~800
Stroke tolerance: (0~+0.5) 0~150(0~+1.0) >150(0~+1.4)
Cushion Type: No Cushion  Bumper
Port Size: Tube M5X0.8


Stroke:

Bore size(mm) Standard Stroke(mm) Max Stroke(mm) Allow Stroke(mm)
PB
4 5 10 15 20 
20 20
6 10 15 20 25 30 40 50 60 60 60
10 10 15 20 25 30 40 50 60 75 80 100 125 150 160 175 200 200 200
12 10 15 20 25 30 40 50 60 75 80 100 125 150 160 175 200 200 300
16 10 15 20 25 30 40 50 60 75 80 100 125 150 160 175 200 250 300 300 300
PBD - 6 5 10 15 20 25 30 40 50 50 -
PBJ
10 10 15 20 25 30 40 50 60 75 80 100 100 -
12 10 15 20 25 30 40 50 60 75 80 100 125 150 160 175 200 200 -
16 10 15 20 25 30 40 50 60 75 80 100 125 150 160 175 200 200 -
Bore size(mm) Standard Stroke(mm)
PSB - 4 5 10 15 20
PBT
6 5 10 15 20 25 30 40 50 60
10 5 10 15 20 25 30 40 50 60
12 5 10 15 20 25 30 40 50 60
16 5 10 15 20 25 30 40 50 60


Product Feature:

1.JIS standard is implemented.

2. It belongs to mini cylinder that has compact structure, small volume and light weight.

3.The guide precision of piston rod is high and no additional lubricant is needed.

4.PB4 and PB6 can only be front mounted. PB10, PB12 and PB16 has the flexibility of both  front and rear mount.

5.Piston rod stainless steel barrel make the cylinder adapt general corrosive working environment.

6.There are cylinders and accessories with several specifications for installation for your choice.

7.It has small cylinder diameter and quick reaction, suitable for the working environment with higher frequency.


Installation & Usage:

1. When load changes in the work, the cylinder with abundant output capacity shall be ed.

2.Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion.

3.Necessary protection measure shall be taken in the environment with higher humidity, much dust or water drops, oil dust and welding dregs.

4.Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.

5.The medium used by cylinder shall be filtered to 40μm or below.

6.Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.

7.The cylinder shall be carried out test run without load before application. Prior to run, buffer shall be turned to the minimum and gradually released to avoid the damage on cylinder caused by excessive impact.

8.The cylinder shall avoid the influence of side load in operation to maintain the normal work of cylinder and extend the service life.

9. If the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment to the  surface. Anti-dust caps shall be added in air inlet and outlet ports.

Order Code:
PB Series.jpg
Symbol:
PB Series.jpg
Contact us
E-mail:info@fitsitech.com
Tel:+86-19928764188 
Add:Pengji Industrial Zone, Liantang Road, Liantang Street, Luohu District, Shenzhen, China

     
Inquiry
Name:
E-mail:
Description:
CopyRight © 2010~2017 Shenzhen Fitsi Technology Co.,LTD All Right Reserved.     Sitemap    粤ICP备14001694号-由万创科技提供技术支持