Products
Multi-mount Cylinder、Twin-rod Cylinder、Tri-rod Cylinder
MU4X4 MU4X6 MU4X8 MU4X10 MU4X15 MU4X20 MU6X4 MU6X6 MU6X8 MU6X10 MU6X15 MU6X20 MU6X25 MU6X30 MU Series Mini Free Mount Cylinder
  • MU10X4
  • MU10X4-1
  • MU10X4-2
MU4X4 MU4X6 MU4X8 MU4X10 MU4X15 MU4X20 MU6X4 MU6X6 MU6X8 MU6X10 MU6X15 MU6X20 MU6X25 MU6X30 MU Series Mini Free Mount Cylinder

Product Name: MU Series Mini Free Mount Cylinder
Product Model: MU4X4 MU4X6 MU4X8 MU4X10 MU4X15 MU4X20 MU6X4 MU6X6 MU6X8 MU6X10 MU6X15 MU6X20 MU6X25 MU6X30
Valve Type: Multi-mount Cylinder, Air Cylinder
Brand: AirTAC
Fluid: Air
Acting: Double Acting
Cushion Type: Bumper



Download:
Specification:

Specification:

Bore size: 6 8 10
Acting type: MU: Double Acting MSU: Single Acting Push
Fluid:
Air(to be filtered by 40μm filter element)
Operating Pressure: Double Acting: 0.15~0.7MPa(22~100psi) 0.1~0.7MPa(15~100psi)
Single Acting: 0.3~0.7MPa(44~100psi) 0.2~0.7MPa(29~100psi)
Proof pressure: 1.05MPa(150psi)
Temperature(℃): -20~80
Speed rang (mm/s): Double Acting: 30~500      Single Acting:50~500
Stroke tolerance: (0~+1.0) 
Cushion Type: Without
Port Size: M3X0.5

① PT thread, NPT thread and G thread are available.
Stroke:

Bore size(mm) Standard Stroke(mm) Max Stroke(mm)
6

Double Acting:  4 6 8 10 15 20 25 30 30
Single Acting: 4 6 8 8
8 Double Acting: 4 6 8 10 15 20 25 30 30
Single Acting: 4 6 8 10 10
10
Double Acting:  4 6 8 10 15 20 25 30 30
Single Acting: 4 6 8 10 10

① other special itinerary please contact with the company;

② The max range of non-standard travel range of more than a standard stroke restructuring, its dimensions for the previous standard stroke cylinder dimensions. Such as the stroke of 23 non-standard stroke cylinder is a standard stroke of 25 standard cylinder restructuring, its dimensions and the same.


Product Feature:

1.JIS standard is implemented.

2.Cylinder can be mounted from 4 directions, and convenient to install and use.

3.Multitudinous cylinder can be mounted side by side to save space.

4.The front end of the cylinder is designed with boss. Centering can be done easily.

5.The internal diameter of the body is treated with rolling followed by the treatment of hard anodizing, forming an excellent abrasion resistance and durability.

6.With magnet type is of the feature of position sensing.

7.There are magnetic switch slots around the cylinder body, which is convenient to install inducting switch.

8.The seal of piston adopts heterogeneous two-way seal structure. It has compact dimension and the function of grease reservation.


Installation & Usage:

1. When load changes in the work, the cylinder with abundant output capacity shall be ed.

2.Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion.

3.Necessary protection measure shall be taken in the environment with higher humidity, much dust or water drops, oil dust and welding dregs.

4.Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.

5.The medium used by cylinder shall be filtered to 40μm or below.

6.Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.

7.The cylinder shall be carried out test run without load before application. Prior to run, buffer shall be turned to the minimum and gradually released to avoid the damage on cylinder caused by excessive impact.

8.The cylinder shall avoid the influence of side load in operation to maintain the normal work of cylinder and extend the service life.

9. If the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment to the  surface. Anti-dust caps shall be added in air inlet and outlet ports.

Order Code:

MU Series.jpg

More product models can refer to the following:

MU4X4MU4X6MU4X8
MU4X10
MU4X15MU4X20MU6X4MU6X6MU6X8
MU6X10
MU6X15MU6X20MU6X25MU6X30MU8X4MU8X6MU8X8
MU8X10
MU8X15MU8X20
MU8X25MU8X30MU10X4MU10X6MU10X8
MU10X10
MU10X15MU10X20MU10X25MU10X30
MU12X5MU12X10MU12X15
MU12X20
MU12X25MU12X30MU12X35MU12X40MU12X45MU12X50
MU16X5MU16X10MU16X15
MU16X20
MU16X25MU16X30MU16X35MU16X40MU16X45MU16X50
MU20X5MU20X10MU20X15
MU20X20
MU20X25MU20X30MU20X35MU20X40MU20X45MU20X50
MSU4X4MSU4X6MSU4X8
MSU4X10
MSU4X15MSU4X20MSU6X4MSU6X6MSU6X8
MSU6X10
MSU6X15MSU6X20MSU6X25MSU6X30MSU8X4MSU8X6MSU8X8
MSU8X10
MSU8X15MSU8X20
MSU8X25MSU8X30MSU10X4MSU10X6MSU10X8
MSU10X10
MSU10X15MSU10X20MSU10X25MSU10X30
MSU12X5MSU12X10MSU12X15
MSU12X20
MSU12X25MSU12X30MSU12X35MSU12X40MSU12X45MSU12X50
MSU16X5MSU16X10MSU16X15
MSU16X20
MSU16X25MSU16X30MSU16X35MSU16X40MSU16X45MSU16X50
MSU20X5MSU20X10MSU20X15
MSU20X20
MSU20X25MSU20X30MSU20X35MSU20X40MSU20X45MSU20X50


Symbol:
MU Series.jpg
Contact us
E-mail:info@fitsitech.com
Tel:+86-19928764188 
Add:Shangmei Times, 57 Longguan East Road, Tsinghua Community, Longhua Street, Longhua District, Shenzhen, China

     
Inquiry
Name:
E-mail:
Description:
CopyRight © 2010~2017 Shenzhen Fitsi Technology Co.,LTD All Right Reserved.     Sitemap    粤ICP备14001694号-由万创科技提供技术支持