Products
Standard Cylinders
Double Acting AIRTAC Variable Cushion JSI32X25 JSI32X100 JSI32X350 JSI32X1000S Stabdard Pneumatic Cylinder
  • JSI80X50S
  • JSI100X50S
  • JSID80X50S
  • JSIJ80X50-20S
Double Acting AIRTAC Variable Cushion JSI32X25 JSI32X100 JSI32X350 JSI32X1000S Stabdard Pneumatic Cylinder

Product Name: JSI Series Stabdard Cylinder
Product Model: JSI32X25 JSI32X100 JSI32X350 JSI32X1000S
Valve Type: Stabdard Cylinder, Pneumatic Cylinder
Brand: AirTAC
Fluid: Air
Mounting Type: Basic  FA  FB  CA  CB  CR  LB  TC  TCM1  TCM1
Acting: Double Acting
Cushion Type: Variable Cushion



Download:
Specification:

Specification:

Bore size: 32 40 50 63 80 100 125
Acting type: Double Acting
Fluid:
Air(to be filtered by 40μm filter element)
Mounting Type:
JSI Basic  FA  FB  CA  CB  CR  LB  TC  TCM1  TCM1
JSID、JSIJ Basic  FA  LB  TC  TCM1  TCM1
Operating pressure: 0.10~1.0MPa(15~145psi)(1.0~10.0bar)
Proof pressure: 1.5MPa(215psi)(15bar)
Temperature(℃): -20~80
Speed rang (mm/s): 30~800
Stroke tolerance: 0~250(0~+0.1)  251~1000(0~+1.4)   1001~1500(0~+1.8)
Cushion Type: Variable Cushion
Adjustable Cushion Stroke mm: 24 32 37.5 40
Port Size: PT1/8 PT1/4 PT3/8 PT1/2

① PT thread, NPT thread and G thread are available.

Stroke:

Bore size(mm) Standard Stroke(mm) Max Stroke(mm) Allow Stroke(mm)
32 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 1000 1800
40 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 600 700 800 900 1000 1200 1800
50 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 600 700 800 900 1000 1200 1800
63 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 600 700 800 900 1000 1500 1800
80 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 600 700 800 900 1000 1500 1800
100 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 600 700 800 900 1000 1500 1800
125 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 600 700 800 900 1000 1500 1800



Product Feature:

1.JIS standard cylinder.

2.The seal of piston adopts heterogeneous two way seal structure. It’s dimension is tight and it has the function of greasel reservation.

3.The Mickey Mouse-shaped aluminum barrel of JSI series has no tie rod and good performance of corrosion resistance.

4.Compared with ISO15552 standard cylinder, the cylinder of JSI series with the same cylinder diameter is shorter.

5.The buffer adjustment of cylinder is smooth and steady.

6.Cylinders and mounting accessories for installation with several specifications are optional.

7.The seal material with high temperature resistance is adopted to guarantee the normal operation of cylinder at 150℃.

Installation & Usage:
1. When load changes in the work, the cylinder with abundant output capacity shall be ed.

2.Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion.

3.Necessary protection measure shall be taken in the environment with higher humidity, much dust or water drops, oil dust and welding dregs.

4.Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.

5.The medium used by cylinder shall be filtered to 40μm or below.

6.Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.

7.The cylinder shall be carried out test run without load before application. Prior to run, buffer shall be turned to the minimum and gradually released to avoid the damage on cylinder caused by excessive impact.

8.The cylinder shall avoid the influence of side load in operation to maintain the normal work of cylinder and extend the service life.

9. If the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment to the  surface. Anti-dust caps shall be added in air inlet and outlet ports.


Order Code:
JSI Series.jpg
Symbol:
JSI系列.jpg
Contact us
E-mail:info@fitsitech.com
Tel:+86-19928764188 
Add:Shangmei Times, 57 Longguan East Road, Tsinghua Community, Longhua Street, Longhua District, Shenzhen, China

     
Inquiry
Name:
E-mail:
Description:
CopyRight © 2010~2017 Shenzhen Fitsi Technology Co.,LTD All Right Reserved.     Sitemap    粤ICP备14001694号-由万创科技提供技术支持