Compact Cyinder
AirTAC TACQ Series Pneumatic Air Cylinder TACQ12X5 TACQ12X10 TACQ12X15 TACQ12X20 TACQ12X25 Compact Cylinder
  • TACQ50X80S
  • TACQ50X100S
  • TACQ80X100S
  • TACQ100X100S
  • TACQ50X100ST
AirTAC TACQ Series Pneumatic Air Cylinder TACQ12X5 TACQ12X10 TACQ12X15 TACQ12X20 TACQ12X25 Compact Cylinder

Product Name: TACQ Series Compact Cyclinder
Product Model: TACQ12X5 TACQ12X10 TACQ12X15 TACQ12X20 TACQ12X25
Valve Type: Compact Cylinder, Air Cyclinder
Brand: AirTAC
Fluid: Air
Acting Type: Double Acting



Bore size: 12 16 20 25 32 40 50 63 80 100
Acting type: Double Acting
Air(to be filtered by 40μm filter element)
Operating Pressure: 0.1~1.0MPa(15~145psi)(1.0~10.0bar)
Proof pressure: 1.5MPa(215psi)
Temperature(℃): -20~80
Speed rang (mm/s): 30~500
Stroke tolerance: (0~+1.0)
Cushion Type: Bumper
Non-rotating Tolerance:
±0.2° ±0.1°
Port Size: M5X0.8 PT1/8 PT1/4 PT3/8

① PT thread, NPT thread and G thread are available.

Bore size(mm) Standard Stroke(mm) Max Stroke(mm)
Rang of Intermediate Stroke(mm)
5 10 15 20 25 30 35 40 45 50 75 100
12 16

× × × × × × 30 1~29
20 25 × × 50 1~49
32 40 100 1~99
50 63
80 100
× 100

① In the Intermediate Stroke out of the standard Stroke, its dimensions for the previous standard stroke cylinder dimensions. Such as the stroke of 23 non-standard stroke cylinder is a standard stroke of 25 standard cylinder restructuring, its dimensions and the same.

Product Feature:

1.JIS standard is implemented.

2.C clip  is adopted to connect the cylinder body and back cover or front cover, and riveted structure is adopted to connect piston and piston rod to make it compact and reliable.

3.The internal diameter of the body is treated with rolling followed by the treatment of hard anodizing, forming an excellent abrasion resistance and durability.

4.The seal of piston adopts heterogeneous two-way seal structure. It has compact dimension and the function of grease reservation.

5.Compact structure can effectively save installation space.

6.There are magnetic switch slots around the cylinder body, which is convenient to install inducting switch.

7.Installing accessories with various specifications are optional.

Installation & Usage:
1. When load changes in the work, the cylinder with abundant output capacity shall be ed.

2.Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion.

3.Necessary protection measure shall be taken in the environment with higher humidity, much dust or water drops, oil dust and welding dregs.

4.Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.

5.The medium used by cylinder shall be filtered to 40μm or below.
6.As both of the front cover and piston of the cylinder are short, typically too large stroke can not be ed.

7.Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.

8.The cylinder shall avoid the influence of side load in operation to maintain the normal work of cylinder and extend the service life.

9. If the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment to the  surface. Anti-dust caps shall be added in air inlet and outlet ports.

10.C clip Installation:

     10.1. Removal & Installation of C clip must be done with proper tool & care.

     10.2. Ensure C clip is securely fitted into the proper slot to prevent leakage.

Order Code:
TACQ Series.jpg

TACQ Series.jpg

Contact us
Add:Shangmei Times, 57 Longguan East Road, Tsinghua Community, Longhua Street, Longhua District, Shenzhen, China

CopyRight © 2010~2017 Shenzhen Fitsi Technology Co.,LTD All Right Reserved.     Sitemap    粤ICP备14001694号-由万创科技提供技术支持