Manually Actuated Valves
AirTAC Pneumatic Air Valve 4 Way 2 Position Hand Operated Lever 4HV2□□-06 4HV2□□-08 4HV3□□-08 4HV3□□-10 4HV4□□-15 4HV4□□-20
  • 4HV310-08
  • 4HV310-06
  • 4HV230-06
  • 4HV230-08
AirTAC Pneumatic Air Valve 4 Way 2 Position Hand Operated Lever 4HV2□□-06 4HV2□□-08 4HV3□□-08 4HV3□□-10 4HV4□□-15 4HV4□□-20

Product Name:4HV、4HVL Series Pneumatic Solenoid Valve
Product Model:4HV2□□-06 4HV2□□-08 4HV3□□-08 4HV3□□-10 4HV4□□-15 4HV4□□-20
Valve Type:Solenold Valve, Manual Hand Pull Valve
Fluid: Air
Position & Way Number:4 Port 2 Position; 4 Port 3 Position
Acting: Manual control direct acting type

Model: 4HV2□□-06(L) 4HV2□□-08(L) 4HV3□□-08(L) 4HV3□□-10(L) 4HV4□□-15(L) 4HV4□□-20(L)
Fluid: Air(to be filtered by 40μm filter element)
Acting: Manual control direct acting type
Port Size: PT1/8 PT1/4 PT1/4 PT3/8 PT1/2 PT3/4
Orifice Size: 14.0mm²(Cv=0.78) 16.0mm²(Cv=0.89) 30.0mm²(Cv=1.67) 33mm²(Cv=1.83) 88.0mm²(Cv=4.89) 95.0mm²(Cv=5.27)
Valve Type: 4 Port 2 Position; 4 Port 3 Position
Operating Pressure: 0~1.0MPa(0~145psi)
Proof Pressure: 1.5MPa(215psi)
Temperature: -20~70℃
Material of Body: Aluminum Alloy
Lubrication: Not Required
Operating angle: 90°

① PT thread,NPT thread and G thread are available.

Product Feature:
1. The direction-change turns lightly with good hand feeling and exact orientation. 

2. Large effective circulating area leads to little pressure loss. 

3. Panel and body installation are optional. The panel installation can be attached with installing nut. 

Installation & Usage:

1.Before installing, be sure the valve hasn't been damaged via transportation.

2.It's suggested to use the medium lubricated by 40μm filter element. Be aware of the flow direction and port size. 

3.Please notice whether the installation condition accords with technical requirements (such as“act-uation frequency”, “working pressure” and “scope of application temperature”), then the equipment can be installed and used. 

4.Notice the flow direction of air during installation, P is the air intake, A (B) is the work port and R (S) is the exhaust outlet. 

5.Take measure to avoid vibration and frozen.

6.Firstly press the base gasket into the base, and then connect the base with the valve body by the affiliated screws. The base gasket can be pressed into the installation places that are not used temporarily, and then seal them with affiliated blank cap. When the system expands, take the blank cap off and install relative air valves; 

7.To keep the dust away, please use the silencer for the exhaust ports. Never forget to install dirt-proof boot in air intake and outlet during dismounting. 

Order Code:
4HV Series.jpg
4HV-4HVL Series Pneumatic Solenoid Valve.gif
Contact us
Add:Shangmei Times, 57 Longguan East Road, Tsinghua Community, Longhua Street, Longhua District, Shenzhen, China

CopyRight © 2010~2017 Shenzhen Fitsi Technology Co.,LTD All Right Reserved.     Sitemap    粤ICP备14001694号-由万创科技提供技术支持