Products
Solenoid Valve
AirTAC Original 3 Way 2 Position Pneumatic Electric Directional Control Solenoid Valve 3V206 3V208
  • 3V2-06-NO 24VDC Solenoid Valve
  • 3V2-06-NO Solenoid Valve For Boiler
  • 3V2-06-NO Low Price Solenoid Valve
AirTAC Original 3 Way 2 Position Pneumatic Electric Directional Control Solenoid Valve 3V206 3V208

Product Name:3V2 Series Pneumatic Solenoid Valve
Product Model:3V206 3V208
Valve Type:Solenold Valve, Directional valve
Brand:AirTAC
Fluid: Air
Position & Way Number:3 Port 2 Position
Acting: Direct Acting



Download:
Specification:
Model: 3V206 3V208
Fluid: Air(to be filtered by 40μm filter element)
Acting: Direct Acting
Port Size: PT1/8 PT1/4
Valve Type: 3 Port 2 Position
Operating Pressure: 0~0.8MPa(0~114psi)
Proof Pressure: 1.5MPa(215psi)
Temperature: -20~70
Material of Body: Aluminum Alloy
Lubrication: Not Required
Max Frequency: 10 Cycle/Sec
Orifice Size: 3.2mm²(Cv=0.18) 3.4mm²(Cv=0.19)
Standard Voltage: AC220V,AC110V,AC24V,DC24V,DC12V
Scope of Voltage: AC:±15% DC:±10%
Power Consumption: AC:7.0VA  DC:7.0W
Protection: IP65(DIN40050)
Temperature Classification: B Class
Electrical Entry: Termina,Grommet
Activating Time: 0.05 Sec and Below

① The maximum actuation frequency is the no-load state.

Product Feature:

1.Direct acting type and normally closed mode, flexible in direction change.

2.No need to add oil for lubrication.

3.Several valves can be installed integrately to save installation space.

4.Affiliated manual devices are equipped to facilitate installation and debugging.

5.Several standard voltage grades are optional.

Installation & Usage:

1.Before installing, be sure the valve hasn't been damaged via transportation. 

2.It's suggested to use the medium lubricated by 40μm filter element. Be aware of the flow direction and port size. 

3.Please notice whether the installation condition accords with technical requirements (such as “voltage”, “actuation frequency”, “working pressure” and “scope of application temperature”), then the equipment can be installed and used. 

4.Notice the flow direction of air during installation, P is the air intake, A (B) is the work port and R (S) is the exhaust outlet. 

5.Take measure to avoid vibration and frozen. 

6.Before using the fittings and tubes make sure they are clean. When connecting to fittings, be sure the PTFE Thread Seal Tape is used correctly. 

7.After installing, please use the manual override to test valve first. 


Order Code:
3V200 Series.jpg
Symbol:
3V2系列.jpg
Contact us
E-mail:info@fitsitech.com
Tel:+86-19928764188 
Add:Shangmei Times, 57 Longguan East Road, Tsinghua Community, Longhua Street, Longhua District, Shenzhen, China

     
Inquiry
Name:
E-mail:
Description:
CopyRight © 2010~2017 Shenzhen Fitsi Technology Co.,LTD All Right Reserved.     Sitemap    粤ICP备14001694号-由万创科技提供技术支持