Pneumatic Control Valve
AirTAC 3 Way 2 Position Pneumatic Air Pilot Valve 3A310-08 3A320-08 3A310-10 3A320-10
  • 201511051000255741
  • 12081978064_1836817215.400x400
  • 12119500060_1836817215.400x400
  • 12153287032_1836817215.400x400
AirTAC 3 Way 2 Position Pneumatic Air Pilot Valve 3A310-08 3A320-08 3A310-10 3A320-10

Product Name:3A300 Series Pneumatic Solenoid Valve
Product Model:3A310-08 3A320-08 3A310-10 3A320-10
Valve Type:Solenold Valve, Pneumatic Control Valve
Fluid: Air
Position & Way Number:3 Port 2 Position
Acting: Exterior Control

3A310-08 3A320-08 3A310-10 3A320-10
Fluid: Air(to be filtered by 40μm filter element)
Acting: Exterior Control
Port Size: In=Out=1/4"
Orifice Size: 25.0mm²(Cv=1.39) 30.0mm²(Cv=1.67)
Valve Type: 3 Port 2 Position
Operating Pressure: 0.15~0.8MPa(21~114psi)
Proof Pressure: 1.5MPa(215psi)
Temperature: -20~70
Material of Body: Aluminum Alloy
Lubrication: Not Required
Max Frequency: 5 Cycle/Sec

① PT thread, NPT thread and G thread are available.
②Once lubricated air is used, continue with same medium to optimise valve life span. Lubricants like ISO VG32 or equivalent are recommended.
③The maximum actuation frequency is the no-load state.

Product Feature:

1.Structure in sliding column mode: good tightness and sensitive reaction. 

2.Double control solenoid valves have memory function.

3.Internal hole adopts special processing technology which has little attrition friction, low start pressure and long service life.

4.No need to add oil for lubrication.
5. Multi-mounting helps to install and apply. 

6.It is available to form integrated valve group with the base to save installation space.

Installation & Usage:

1.Before installing, be sure the valve hasn't been damaged via transportation.

2.It's suggested to use the medium lubricated by 40μm filter element. Be aware of the flow direction and port size. 

3.Please notice whether the installation condition accords with technical requirements (such as“act-uation frequency”, “working pressure” and “scope of application temperature”), then the equipment can be installed and used. 

4.Notice the flow direction of air during installation, P is the air intake, A (B) is the work port and R (S) is the exhaust outlet. 

5.Take measure to avoid vibration and frozen.

6.Firstly press the base gasket into the base, and then connect the base with the valve body by the affiliated screws. The base gasket can be pressed into the installation places that are not used temporarily, and then seal them with affiliated blank cap. When the system expands, take the blank cap off and install relative air valves; 

7.To keep the dust away, please use the silencer for the exhaust ports. Never forget to install dirt-proof boot in air intake and outlet during dismounting. 

Order Code:
3A300 Series.jpg
3A11006NC 3A12006 3A21006NO 3A21008NC 3A22008 3A31010NO
3A11006NO 3A21006NC 3A22006 3A21008NO 3A31010NC 3A32010
Contact us
Add:Shangmei Times, 57 Longguan East Road, Tsinghua Community, Longhua Street, Longhua District, Shenzhen, China

CopyRight © 2010~2017 Shenzhen Fitsi Technology Co.,LTD All Right Reserved.     Sitemap    粤ICP备14001694号-由万创科技提供技术支持