Products
Flow Control Valve
2P025-06 2P025-08 AIRTAC 2P Series Flow Control Valve
  • 2P025-08-BIG
  • 2P025-06
  • 2P025-06-AIG
  • 2P025-06-BIG
  • 2P025-08
2P025-06 2P025-08 AIRTAC 2P Series Flow Control Valve

Product Name:2P Series Flow Control Valve
Product Model:2P025-06 2P025-08
Valve Type:Normally Closed Valves
Brand:AirTAC
Fluid: Air、water、Oil
Viscosity limit:Under 20CST



Download:
Specification:
Model: 2P025-06 2P025-08
Fluid: Air、Water、Oil
Acting: Direct Acting 
Type: Normally Closed
Orifice Size(Φmm): 2.5
Cv Valve: 0.23
Port Size: G1/8
G1/4
Viscosity Limit: Under 20CST
Pressure Range: 0~0.7MPa(0~100psi)
Proof Pressure: 1.05MPa(150psi)
Material of Body: Nylon 66
Seal Material: VITON
Min Activating Time Sec: 0.05 Sec and Below

① PT thread,NPT thread and G thread are available.

Specification of coil:

Valve Type: Power Type: Frequency(Hz) Voltage Range Eletrical Entry Power Consumption(VA/W) Insulation Temperature Rise(℃)
2P025
AC 50 ±15% Terminal
Gormmet

7.0VA Class B 35
60
DC - ±10% 7.0W 45


Product Feature:

1.Direct acting and normally closed type 2/2 way solenoid valve. Its high sensitivity allows it to change direction quickly.

2.Its compact size is small and light weight. It is easy to install and dismantle.
3.The valve body is made of Nylon 66. Its coil has a Heat resistance classification of Class B . The seals are made of Viton which is suitable for different types of fluid.
4.The protection class of the coil is IP65, and the electrical entry is grommet.

Installation & Usage:

1.Check whether the components have been damaged during transportation before installing and using.

2.Pay attention to whether the flow direction of air (notice “→” direction) and thread type are correct.

3.Please notice whether installation condition accords with technical requirements (such as “working  pressure” and “applied temperature range”);

4.Take measure to avoid vibration and frozen.

5.Before using the fittings and tubes make sure they are clean. When connecting tofittings, be sure the PTFE Thread Seal Tape is used correctly.

6.Keep the dust away. The dust cover shall be installed in intake and outlet when the device is dismantled and stored.

Order Code:
2P02508AIG.jpg
Symbol:
2P系列.jpg
Contact us
E-mail:info@fitsitech.com
Tel:+86-19928764188 
Add:Shangmei Times, 57 Longguan East Road, Tsinghua Community, Longhua Street, Longhua District, Shenzhen, China

     
Inquiry
Name:
E-mail:
Description:
CopyRight © 2010~2017 Shenzhen Fitsi Technology Co.,LTD All Right Reserved.     Sitemap    粤ICP备14001694号-由万创科技提供技术支持