Flow Control Valve
2KLH030 2KL030 2KLH050 2KL050 2KL Series Direct-acting and Normally opened Flow Control Valve
  • 2KL030
  • 2KL050
  • 2KLH030-1
  • 2KLH030
  • 2KLH050
2KLH030 2KL030 2KLH050 2KL050 2KL Series Direct-acting and Normally opened Flow Control Valve

Product Name:2KL Series Direct-acting and Normally opened Flow Control Valve
Product Model:2KLH030 2KL030 2KLH050 2KL050

Type/Item: Port Size: Orifice Size(Φmm): Cv Valid Area or Section(mm²) Weight(g): Max Operating Pressure Differentia: Proof Pressure:
MPa psi MPa psi
2KLH030 -06 PT1/8 2.0 0.18 3.0 305 1.5 220 3.0 450
-08 PT1/4 295
2KL030 -06 PT1/8 3.0 0.33 6.0 305 0.7 100
-08 PT1/4 295
2KLH050 -10 PT3/8 4.0
0.55 10.0 610 1.5 220
-15 PT1/2 600
2KL050 -10 PT3/8 5.0
0.83 15.0 610 0.7 100
-15 PT1/2 600
① PT thread, NPT thread and G thread are available.
②The weight in the table is the terminal valve's weight, 2W030 series gormmet valve's weight is 10g less than terminal's. 2W050 series gormmet valve's weight is 20g less than terminal's.

Specification of coil:
Valve Type: Coil Type: Power Type: Frequency(Hz) Voltage Range Eletrical Entry Power Consumption(VA/W) Insulation Temperature Rise(℃)
2KL□030 CDA116
AC 50 ±15% Terminal(CAD)
15.0VA Class B 50
60 11.0VA 40
DC - ±10% 6.5VA 30
2KL□050 CDA170
AC 50 ±15% 35.0VA 65
60 30.0VA 60
DC - ±10% 10.5VA 40

Valve's Specification:

Acting: Direct Acting
Initial Stats: Normally Closed
Adaptable Fluid: Steam, Hight Temperature Water, Oil
Viscosity Limit: Under 20CST
Ambient and Fluid Temperature(℃):
Oil Water Steam Ambient
Max 150 150 183 100
Min -10 1 - -20

Product Feature:

1.Indirect acting(Internal pilot) and normally closed type 2/2 way solenoid valve. Its can change direction quickly and has large flow.

2.It is compact, small and light weight. It is easy to install and dismantle;

3.The valve body is made of brass . The coil has a Heat resistance classification of Class B. The standard seal material is FPM-F. Please contact us if other material are required.

4.The protection class of the coil is IP65 and there is a choice for grommet or terminal electrical entry.

Installation & Usage:

1.Check whether the components have been damaged during transportation before installing and using.

2.Pay attention to whether the flow direction of air (notice “→” direction) and thread type are correct.

3.Please notice whether installation condition accords with technical requirements (such as “working  pressure” and “applied temperature range”);

4.Take measure to avoid vibration and frozen.

5.Before using the fittings and tubes make sure they are clean. When connecting tofittings, be sure the PTFE Thread Seal Tape is used correctly.

6.Keep the dust away. The dust cover shall be installed in intake and outlet when the device is dismantled and stored.

Order Code:
Contact us
Add:Shangmei Times, 57 Longguan East Road, Tsinghua Community, Longhua Street, Longhua District, Shenzhen, China

CopyRight © 2010~2017 Shenzhen Fitsi Technology Co.,LTD All Right Reserved.     Sitemap    粤ICP备14001694号-由万创科技提供技术支持